Hi
What should the gap be between the top of the rear axle bumpstop and the body on a 2 door saloon? Mine is about 2 inches and seems low - Springs & dampers are good.
Just looking to compare & see whats normal.
Thanks!
Ride Height
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
MichaelBeckNZ
- Minor Friendly
- Posts: 15
- Joined: Thu Jan 12, 2017 8:08 am
- MMOC Member: No
Re: Ride Height
I have increased the clearence to 3 inches by cutting one inch from the bump stop rubbers to give increased suspension travel. However it is important not to just cut off the top of the stop but to maintain the original taper so as to provide progressive compression of the rubbers as was originally intended. I cut mine on a band saw.
Bob
Bob
