fitting rear window

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
dockerman
Minor Friendly
Posts: 25
Joined: Tue Oct 11, 2016 11:40 pm
MMOC Member: No

fitting rear window

Post by dockerman »

could someone tell me when fitting a rear windscreen do you fit the rubber to to the glass and seal then fit the screen from inside the car and seal or fit the rubber to the car first and seal then fit the glass from inside the car and seal ??
johngrigg
Minor Friendly
Posts: 72
Joined: Wed Jul 16, 2008 3:46 am
Location: Melbourne Australia
MMOC Member: No

Re: fitting rear window

Post by johngrigg »

fit the rubber to the glass then fit the whole shooting match from inside. B**gger of a job. I eventually gave in and got a pro to fit mine, which is against my religion. Even he found he had to use a lot of bad language.......
minijojo
Minor Fan
Posts: 188
Joined: Thu May 14, 2015 5:16 pm
Location: Wedel near Hamburg, Germany
MMOC Member: Yes

Re: fitting rear window

Post by minijojo »

one of my manuals says
put the rubber on the window. Put a string in the nut round the rubber where it should fit the window frame. Place the window from inside the car with the string showing to outside and let it hold by a assistant. pull the string fron outside to lift the flange of the rubber seal over the frame into place.

i would have done it from outside to inside for this is the way i have done this on several cars before. But, i think, someone would have a good reason to do it the other way round. Would be interesting if someone knows why
alanworland
Minor Legend
Posts: 1453
Joined: Tue Jan 30, 2007 10:09 pm
Location: Essex
MMOC Member: No

Re: fitting rear window

Post by alanworland »

I fitted my small rear window which went really well and I would imagine it's fitted from the inside as the inner flange is much bigger than the outer.

Alan
Image
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: fitting rear window

Post by DAVIDMCCULLOUGH »

As Alan says the flange is much bigger on the inside and it also covers the edge of the headcloth. Not a pleasant job to do, Ive fitted several and most of them end up with a little nick out of the rubber somewhere. Would also say its a 3 person job, 2 holding from the inside and one to work a screwdriver to get the edge started and then pull on the string.


Too many Minors so little time.....
minijojo
Minor Fan
Posts: 188
Joined: Thu May 14, 2015 5:16 pm
Location: Wedel near Hamburg, Germany
MMOC Member: Yes

Re: fitting rear window

Post by minijojo »

yes, that makes sense. thanks for the explenation
dockerman
Minor Friendly
Posts: 25
Joined: Tue Oct 11, 2016 11:40 pm
MMOC Member: No

Re: fitting rear window

Post by dockerman »

well its in thank the lord two inside the car one on the outside with a plastic tool no string needed loads of ky jelly and tomorrow night will try the split screen
alanworland
Minor Legend
Posts: 1453
Joined: Tue Jan 30, 2007 10:09 pm
Location: Essex
MMOC Member: No

Re: fitting rear window

Post by alanworland »

I wish you all the best!

Alan
Image
RobThomas
Minor Legend
Posts: 2647
Joined: Thu May 11, 2006 10:34 am
Location: Cardiff
MMOC Member: Yes

Re: fitting rear window

Post by RobThomas »

well its in thank the lord two inside the car one on the outside with a plastic tool no string needed loads of ky jelly

You can see that sort of thing in a carpark near us on certain nights!
Cardiff, UK
Post Reply