Hi all I have just fitted the new conversion alternator from ESM and the fan belt did not fit I needed to make a larger adjusting bracket (about 3" longer) then last night I had a thought could the kit I got from ESM have the wrong belt included the part number is 10A0925C, thinking about it I should not have needed to make any brackets has anyone else fitted one of these.
Thanks Rich
Fan belt on alternator conversion
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Newbie
- Posts: 4
- Joined: Tue Oct 25, 2016 3:20 pm
- MMOC Member: No
Re: Fan belt on alternator conversion
The kit should come with the right belt, give them a ring and explain and I'm sure they will sort it out.
-
- Minor Legend
- Posts: 1956
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: Fan belt on alternator conversion
The belt on my alternator is 838mm. I don't know if it came from ESM though as it was on the car when I bought it. I also think they might have sent you the wrong (925mm) belt.
Regards
Declan
[frame][/frame]
Regards
Declan
[frame][/frame]
Regards
Declan
-
- Minor Addict
- Posts: 985
- Joined: Mon May 26, 2014 3:26 pm
- Location: North Kent
- MMOC Member: No
Re: Fan belt on alternator conversion
I got my Alternator kit from them too and it came supplied with the pulley and belt to match. Unfortunately I am not in a position to go and have a look at what size it is
-
- Minor Fan
- Posts: 113
- Joined: Wed Sep 23, 2015 9:33 am
- Location: North Devon
- MMOC Member: No
Re: Fan belt on alternator conversion
Dayco 10A0813C belt on mine,1275cc but think all the pulleys are the same size?
1968 2 door 1275
Re: Fan belt on alternator conversion
Mine are standard 1098 engines with alternators and all use the 813 belt. My notes says that the dynamo uses 825. You should not have to make any additional parts, the kit is complete.
-
- Newbie
- Posts: 4
- Joined: Tue Oct 25, 2016 3:20 pm
- MMOC Member: No
Re: Fan belt on alternator conversion
Thanks guys I have been sent wrong belt fitted a 825 belt and all fits and works could have saved myself a lot of hassle