Anyone know anything about these?
[frame][/frame]
Made by Spax, adjustable, same size as rear Morris Minor Armstrong Dampers.
When I search online I keep getting information about milking equipment valves.
VariFlow Dampers
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: VariFlow Dampers
Roni - I have been able to dig up some info that may be of interest. See attached links.
Bob
http://www.motorsportmagazine.com/archi ... -absorbers
http://mgaguru.com/mgtech/suspensn/fs120.htm
http://www.mgexp.com/phorum/read.php?42,1965830
Bob
http://www.motorsportmagazine.com/archi ... -absorbers
http://mgaguru.com/mgtech/suspensn/fs120.htm
http://www.mgexp.com/phorum/read.php?42,1965830
Re: VariFlow Dampers
Interesting links. Thanks for finding them. I'm guessing Google thinks that if a search is from NZ, it must be about the dairy industry.
I suppose the mentioned " special technical department operated to cope with inquiries" is long gone.
I suppose the mentioned " special technical department operated to cope with inquiries" is long gone.
Re: VariFlow Dampers
Just vary the flow with different grades of oil - SAE 40 is highly recommended.
Re: VariFlow Dampers
i once saw some with added copper tubing and a valve inbetween the two cylinders so you could adjust the flow and therefore dampening inside the shocks.
i dont think it ever caught on
These ones look like you can adjust the pressure on the valves. which you could set up on the bench by adding a washer under the spring inside
i dont think it ever caught on
These ones look like you can adjust the pressure on the valves. which you could set up on the bench by adding a washer under the spring inside
Re: VariFlow Dampers
To add a bit more info about these, - they have an internal spring that re-centers them.