Gasket Kit for 1275...

[bloodyank]

Hi, guys:
I have a 1275 A series engine and I need a gasket kit, and I want to be sure I get the right one. I have a Moss catalog, but I only see parts for 1098's. Can i get it from another supplier? Wonder if there's a USA parts suppliers I can use?

Thanks in advance, as always.

[Declan_Burns]

You really should search under MG Midget 1275 or Marina.
Here's the link to Moss Europe
http://www.moss-europe.co.uk/shop-by-mo ... 275cc.html
Items 2+3

Regards
Declan

[philthehill]

Whilst the standard issue head gasket is adequate I would recommend the fitting of the head gasket as listed in the attached link:-

http://www.minispares.com/product/Class ... assic/head gasket.aspx|Back to search

If you want a full gasket set see link:

http://www.minispares.com/product/Class ... .aspx|Back to

Phil

[bmcecosse]

There must be suppliers of MG parts in California - just get a 1275 set from them and save horrendous shipping costs. Yes - the copper gasket is better for an engine that has been modified for more power, and if you can get one locally - then go for it. Otherwise a standard set will be fine for your engine.

[bloodyank]

Thanks, guys! Moss Motors USA does have 1275 parts for Midgets. For some reason, the valve stem seals kit show intake only. Do I only need intake? Shown below. Thanks again.


"SEAL, valve stem, umbrella 1275 intake only 4"

[Fingolfin]

I source all my 1275 parts from British Parts Northwest, out of Washington state. (Living in Missouri, I, of course, have no connection with them - I just think they're good.) http://www.bpnorthwest.com/

[les]

The exhaust is left without the seals, oil around that area is more help than hindrance.

[bmcecosse]

As above - the exhausts need the lubrication with unleaded fuel . Top-hat seals are only fitted on the inlets. And be sure to use 15 thou gap on the exhaust valves.

[philthehill]

I thought I would Just throw this into the conversation after looking at the BP North West parts link:-

http://www.bpnorthwest.com/copper-coatr ... ealer.html

My neighbour had to take the head of his MG TD which had been installed with some form of sealer - it took several days to raise the head.

Phil

[bmcecosse]

Seriously - a wipe of grease is all you need.

[Fingolfin]

It's extremely common in the States for parts houses to sell that stuff. I work in a local auto parts store, and we carry several brands of it.