Having looked at the photos I would suggest that the head is a 850/998cc Mini/Metro.
The rockers are standard pressed steel ones used on all engine post forged rockers and pre sintered rockers.
Phil
Cylinder head decode
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
philthehill
- Minor Maniac
- Posts: 11579
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Cylinder head decode
It's much earlier than that - no thermometer opening - which Mini/Metro heads have. 803 or 948 Minor head.
-
philthehill
- Minor Maniac
- Posts: 11579
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Cylinder head decode
The casting numbers 2A628, 12A1458, 2A269 which should appear on the head of a 803cc, 850cc, 948cc do not appear to be there though there is a 2A ***** cast into the block.
Here is a link to an early head on 'e' bay which has the correct numbers.
http://www.ebay.co.uk/itm/Early-Morris- ... SwWTRWyHf8
Note the forged rockers - lovely jubly.
Here is a link to an early head on 'e' bay which has the correct numbers.
http://www.ebay.co.uk/itm/Early-Morris- ... SwWTRWyHf8
Note the forged rockers - lovely jubly.
-
Pastypearce
- Minor Friendly
- Posts: 13
- Joined: Tue Aug 18, 2015 9:57 am
- MMOC Member: No
Re: Cylinder head decode
Thanks all, I'll put it up for sale here as its no use to me.