Front bumper wing buffers, where are they fitted?

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
GPO_Van
Minor Fan
Posts: 179
Joined: Tue Sep 28, 2010 10:58 pm
Location: Wirral NorthWest, CH60
MMOC Member: No

Front bumper wing buffers, where are they fitted?

Post by GPO_Van »

Hi All
Have bought the 4 front bumper wing buffers, where about are they are they fitted?
I can see the length of area between wing and bumper valance that is rubbing on each side, I was thinking couple of inches in each side?
Thanks
Reg
Top
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: Front bumper wing buffers, where are they fitted?

Post by DAVIDMCCULLOUGH »

Theres usually some holes in the bottom edge of the wing, one quite near the wheel arch end and the other below were the join is.


Too many Minors so little time.....
Top
GPO_Van
Minor Fan
Posts: 179
Joined: Tue Sep 28, 2010 10:58 pm
Location: Wirral NorthWest, CH60
MMOC Member: No

Re: Front bumper wing buffers, where are they fitted?

Post by GPO_Van »

The holes are missing, lost in the wing repair no doubt.
Top
Post Reply

Return to “Bodywork”