Hello. I just tested the indicators yesterday and found that the nearside ones flash at about twice the speed they should. Front and back are both flashing though. Would there be an obvious (to someone not stupid like me) reason for this?
Chris.
Indicator flashing double speed one side.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
chrisdebois
- Minor Friendly
- Posts: 60
- Joined: Sun May 17, 2015 8:31 pm
- MMOC Member: No
-
chrisdebois
- Minor Friendly
- Posts: 60
- Joined: Sun May 17, 2015 8:31 pm
- MMOC Member: No
Re: Indicator flashing double speed one side.
Thank you again for your help - it is always very much appreciated.
Chris.
Chris.
-
Boomlander
- Minor Legend
- Posts: 1460
- Joined: Sun Sep 25, 2011 6:32 pm
- Location: Clacton On Sea, Essex, ENGLAND.
- MMOC Member: Yes
Re: Indicator flashing double speed one side.
You will find that you need a 21watt bulb in each indicator to operate the flashing relay at the correct speed. 
Re: Indicator flashing double speed one side.
It's pozsiblethere is a double fault with. Twin filament bulb. Earth Fault and blown 21 watt filament, so it is earthing back through the 5 watt filament.....or the bulb may be in wrong wayround!
