Sump gasket

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
meganwilkinson2008
Minor Fan
Posts: 108
Joined: Mon May 20, 2013 3:30 pm
MMOC Member: No

Sump gasket

Post by meganwilkinson2008 »

Hi has anyone got any advice I have recently changed my sump gaskets because both ends were leaking where you put the small gaskets. When I replaced them I noticed the ones on the car were plastic and my replacement ones were cork after two days dry thay are both now leaking again.Is there anything I can do to make these a permanent seal. Many thanks.
Declan_Burns
Minor Legend
Posts: 1958
Joined: Wed Apr 18, 2007 7:32 am
Location: Düsseldorf, Germany
MMOC Member: No

Re: Sump gasket

Post by Declan_Burns »

The plastic one's are actually synthetic rubber seals from the 1275 engine which have to be cut back to size for the smaller engines with a hacksaw as there is a reinforcing wire moulded in. I find these are far superior than the cork and wouldn't use anything else. We have fitted these to many cars with great success.
Regards
Declan


Regards
Declan
Post Reply