Hi all,
Still (high) on my list to buy; a thread size-meter....
But; want to get an order out this afternoon, with the right size nuts for the http://morrisminorspares.co.uk/shop/pro ... 2131ff4d0b
So if anybody could tell me what size nuts I need, thanks in advance !!
Cheers,
Daniel
Thread size "Dynamo adjusting pillar" ?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
danielvoorwerk
- Minor Friendly
- Posts: 78
- Joined: Mon Mar 09, 2015 1:46 pm
- MMOC Member: No
-
smithskids
- Minor Addict
- Posts: 621
- Joined: Wed Sep 05, 2012 9:32 pm
- Location: East Yorkshire
- MMOC Member: Yes
Re: Thread size "Dynamo adjusting pillar" ?
Hi Daniel, 3/8 U.N.F. x 24 threads per inch.is the correct size. One of the nuts is a "NYLOCK" type nut. the other is standard, 
Iain.
Iain.-
danielvoorwerk
- Minor Friendly
- Posts: 78
- Joined: Mon Mar 09, 2015 1:46 pm
- MMOC Member: No
Re: Thread size "Dynamo adjusting pillar" ?
Thanks smithskid !
In the meantime I 'discovered' that's the same as http://morrisminorspares.co.uk/shop/pro ... df95aad458
So like you said....I need the nyloc one, so I ll start looking ;-)
In the meantime I 'discovered' that's the same as http://morrisminorspares.co.uk/shop/pro ... df95aad458
So like you said....I need the nyloc one, so I ll start looking ;-)
Re: Thread size "Dynamo adjusting pillar" ?
If you don't have a 'spares box' full of nuts and bolts - perhaps best to buy a pack of UNF nuts/bolts on ebay...
