I've noticed that my brake discs have become grooved - the grooves aren't deep but they're visible. Is that acceptable?
They've done around 40,000 miles but I wouldn't think they're due for replacement just yet?
However, I've noticed replacement discs for the Marina set-up are vented ones, which look much thicker than 8mm solid ones fitted. Do these fit the standard calipers? Or can anyone suggest where I might get solid discs (if I need them at all!)
Thanks all
Acceptable disc wear?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Acceptable disc wear?
As long as there is still decent thickness on the discs - they will be fine.. I'm sure new discs will still be available - same discs are used on TR7.



Re: Acceptable disc wear?
I doubt you'll need new discs after 40,000 miles unless you did 1,000 of them with no pad material !!!! 
-
GreenGiant57
- Minor Addict
- Posts: 628
- Joined: Wed Apr 11, 2007 10:39 pm
- Location: Chippenham Wiltshire
- MMOC Member: Yes
Re: Acceptable disc wear?
My Marina discs have done 60,000 plus miles and still have plenty of thickness left.