Marina Handbrake
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 37
- Joined: Wed Apr 11, 2012 10:09 am
- Location: York
- MMOC Member: No
Marina Handbrake
I would like to fit a Marina handbrake single cable set up to the Marina Axle I have fitted on my rebuild. Can anybody tell me if there is enough room above the props haft in the tunnel to take the Marina Handbrake and the single cable adjuster?
Re: Marina Handbrake
Yes, I've done it a couple of times. The adjuster is on the axle, just the lever and cable above the shaft. The great advantage of the Marina system is that if one cable breaks, then you have no handbrake, as opposed to the Minor one where you would still have one cable working, albeit at slightly reduced effectiveness. 

-
- Minor Friendly
- Posts: 37
- Joined: Wed Apr 11, 2012 10:09 am
- Location: York
- MMOC Member: No
Re: Marina Handbrake
Thanks slmmltc I will get on with it. 

-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Marina Handbrake
Surely that is a disadvantage?simmitc wrote: The great advantage of the Marina system is that if one cable breaks, then you have no handbrake, .
[sig]3580[/sig]