front wheel bearings
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
- Dryad
- Minor Addict
- Posts: 635
- Joined: Tue Jan 11, 2005 7:37 pm
- Location: South Norfolk
- MMOC Member: No
Re: front wheel bearings
I'm about to replace my front bearings, but am a little confused as to the suggestions for SKF 40° face adjusted bearings;
The following have been suggested on this thread, and as far as I can see there is no difference except in price - a BIG difference!
7205BEP - Inner
7303BEP - Outer
and
7205BECBP - Inner
7303BECBP - Outer
Both sets appear to be 40° face adjusted.
Comments?
The following have been suggested on this thread, and as far as I can see there is no difference except in price - a BIG difference!
7205BEP - Inner
7303BEP - Outer
and
7205BECBP - Inner
7303BECBP - Outer
Both sets appear to be 40° face adjusted.
Comments?
-
- Minor Legend
- Posts: 1092
- Joined: Sat Mar 14, 2009 2:50 am
- Location: Red Deer, Alberta, Canada
- MMOC Member: No
Re: front wheel bearings
According to the SKF website the BECBP series have a slightly higher load rating and also a slightly higher speed rating, 17,000 rpm as opposed to 15,000 rpm.
Talk slow, think fast!
- Dryad
- Minor Addict
- Posts: 635
- Joined: Tue Jan 11, 2005 7:37 pm
- Location: South Norfolk
- MMOC Member: No
Re: front wheel bearings
Thanks Katy. Well I can't imagine a situation where my Morris wheels will be spinning at more than 17,000RPM so I'll go for the much cheaper ones!
-
- Newbie
- Posts: 5
- Joined: Tue Feb 26, 2013 12:47 pm
- MMOC Member: No
Re: front wheel bearings
I'm also having trouble with front wheel bearings (similarly to previous contributors, I've fitted brand new front wheel bearings only to be left with slight play and an MOT advisory). I think that I can solve my problems based on what I've read here. However, does anyone know what 'face adjusted' means?
Re: front wheel bearings
It really is time someone took the suppliers of these useless bearings to task on the matter - perhaps even to Court!
http://www.skf.com/group/products/beari ... index.html
http://www.skf.com/group/products/beari ... index.html
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
Oh, no!!!!
Just ordered Bull Motif premium wheel bearings....
ARGH!
Wish I had read this thread first, well, live and learn....
Hope they will take them back?
Ok, so I'd better get them from SKF, I guess?
Just ordered Bull Motif premium wheel bearings....
ARGH!
Wish I had read this thread first, well, live and learn....
Hope they will take them back?
Ok, so I'd better get them from SKF, I guess?
-
- Minor Fan
- Posts: 117
- Joined: Thu Oct 10, 2013 8:55 pm
- Location: Retford - Nottinghamshire
- MMOC Member: No
Re: front wheel bearings
After speaking to a non to happy man at bull Motif l returned my bearings as faulty and am still awaiting a credit or a refusal to accept them back !
They argue that these premium bearings are the best ! my garage who happened to fit them is willing to argue the fact due to the thickness and quality supplied to me ,they are of a inferior quality and no way premium as quoted ! hence the arrive in unmarked/plain boxes - so l will be prepared to argue the matter further if needed .
Fitted replacement bearings which fitted better - didn't rumble and only cost a little more ! good luck on trying to exchange them
Dave
They argue that these premium bearings are the best ! my garage who happened to fit them is willing to argue the fact due to the thickness and quality supplied to me ,they are of a inferior quality and no way premium as quoted ! hence the arrive in unmarked/plain boxes - so l will be prepared to argue the matter further if needed .
Fitted replacement bearings which fitted better - didn't rumble and only cost a little more ! good luck on trying to exchange them
Dave
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
mrb wrote:After speaking to a non to happy man at bull Motif l returned my bearings as faulty and am still awaiting a credit or a refusal to accept them back !
They argue that these premium bearings are the best ! my garage who happened to fit them is willing to argue the fact due to the thickness and quality supplied to me ,they are of a inferior quality and no way premium as quoted ! hence the arrive in unmarked/plain boxes - so l will be prepared to argue the matter further if needed .
Fitted replacement bearings which fitted better - didn't rumble and only cost a little more ! good luck on trying to exchange them
Dave
Yes, thank you! I am warned.
Bearings arrived this morning, as you said in plain box.
Fingers crossed we'll get our money back.
Re: front wheel bearings
INSIST on it - tell them they are not fit for purpose - as proven by members of the MMOC and discussed widely on the MMOC forum.
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
Yes, you are right.
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
Dryad wrote:I'm about to replace my front bearings, but am a little confused as to the suggestions for SKF 40° face adjusted bearings;
The following have been suggested on this thread, and as far as I can see there is no difference except in price - a BIG difference!
7205BEP - Inner
7303BEP - Outer
and
7205BECBP - Inner
7303BECBP - Outer
Both sets appear to be 40° face adjusted.
Comments?
Sorry, I'm new to all this, so still learning.
So, to replace one front wheel bearing I need an inner an outer and the seal?
Found a place where I can order them online (just the ones from SKF mentioned here), but want to know I'm doing the right thing.
Thank you.
- Dryad
- Minor Addict
- Posts: 635
- Joined: Tue Jan 11, 2005 7:37 pm
- Location: South Norfolk
- MMOC Member: No
Re: front wheel bearings
Yes, you need an inner and outer bearing and a seal per front wheel. I would strongly recommend you go with the SKF brand because they have been tried and tested by people on this forum. Don't just get ones that are the right size because they are not likely to be the 40° face adjusted variety, which is what is needed.
These SKF part numbers are what you need: 7205BEP for the Inner, and 7303BEP for the outer.
These SKF part numbers are what you need: 7205BEP for the Inner, and 7303BEP for the outer.
-
- Minor Fan
- Posts: 117
- Joined: Thu Oct 10, 2013 8:55 pm
- Location: Retford - Nottinghamshire
- MMOC Member: No
Re: front wheel bearings
Reference my post the other day ! have actually now received a credit from Bull Motif for wheel bearings - so am quite satisfied
The supplier l used and was more than happy with - both quality/price and really helpful was Simply Bearings - near Manchester ! ordered on the phone one morning and they arrived next day
Dave
The supplier l used and was more than happy with - both quality/price and really helpful was Simply Bearings - near Manchester ! ordered on the phone one morning and they arrived next day
Dave
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
Dryad wrote:Yes, you need an inner and outer bearing and a seal per front wheel. I would strongly recommend you go with the SKF brand because they have been tried and tested by people on this forum. Don't just get ones that are the right size because they are not likely to be the 40° face adjusted variety, which is what is needed.
These SKF part numbers are what you need: 7205BEP for the Inner, and 7303BEP for the outer.
Fantastic! Thank you!!!
Yes, will definitely go for those, thanks.
My only trouble is now finding the right sized oil seal? How do I find the right size?
sorry, for so many questions....
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
mrb wrote:Reference my post the other day ! have actually now received a credit from Bull Motif for wheel bearings - so am quite satisfied
The supplier l used and was more than happy with - both quality/price and really helpful was Simply Bearings - near Manchester ! ordered on the phone one morning and they arrived next day
Dave
Yes, I'm ordering from them, good idea doing it over the phone, as they can tell me which seals I need.
Thanks for your feedback.
Great news, to hear you got your money back from Bull motif!!!
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
Just been on the phone to simply bearings and it turns out I need to know the size of the oil seal, as there are 2 which would fit.
Help, please.
My Morris is from 1968 in case that makes any difference.
thanks so much.
Help, please.
My Morris is from 1968 in case that makes any difference.
thanks so much.
-
- Minor Friendly
- Posts: 34
- Joined: Fri Jan 28, 2011 8:01 am
- MMOC Member: No
Re: front wheel bearings
All sorted now! Can order the whole lot.
Thank you
Thank you
-
- Minor Fan
- Posts: 423
- Joined: Tue Sep 01, 2015 10:37 am
- Location: East London
- MMOC Member: Yes
Re: front wheel bearings
reviving this thread as per other post with Phil it appears my bearings could be on their way out. I'm buying the 7205BEP and 7303BEP bearings from bearing king, but wondering what size of oil seal i need?
-
- Minor Fan
- Posts: 423
- Joined: Tue Sep 01, 2015 10:37 am
- Location: East London
- MMOC Member: Yes
Re: front wheel bearings
scrap that - have found the below from (guess who) Phil on another thread. posting here to keep in one place
OD is 2.125", ID is 1.375" and thickness is 0.3125" (0.375" is probably OK, but it would stick out 1/16")
OD is 2.125", ID is 1.375" and thickness is 0.3125" (0.375" is probably OK, but it would stick out 1/16")