Regulator testing?

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Regulator testing?

Post by DAVIDMCCULLOUGH »

Has anyone got an idiots guide to checking old regulators? Ive have about 8, all screw in terminal of them and would like to check them in some way before trying to fit onto the car?


Too many Minors so little time.....
beero
Minor Legend
Posts: 1207
Joined: Sun Jun 20, 2010 10:43 pm
Location: Chichester
MMOC Member: No

Re: Regulator testing?

Post by beero »

Try this, not exactly an idiots guide though.

http://home.comcast.net/~rhodes/generator.html

silloyd
Minor Fan
Posts: 374
Joined: Fri Jul 10, 2009 6:37 pm
Location: Cardiff
MMOC Member: No

Re: Regulator testing?

Post by silloyd »

You may also find the 'Lucas Generator and Control Box Tests' document helpful.

(BTW There's also a lot of other really useful stuff on http://mgaguru.com/mgtech/)
_____________________________________________________________________________________


chickenjohn
Minor Legend
Posts: 4064
Joined: Tue Dec 07, 2004 8:50 am
Location: Margate, East Kent
MMOC Member: No

Re: Regulator testing?

Post by chickenjohn »

DAVIDMCCULLOUGH wrote:Has anyone got an idiots guide to checking old regulators? Ive have about 8, all screw in terminal of them and would like to check them in some way before trying to fit onto the car?
David, I will give you the advice given to me by a classic car auto electrician friend of mine.

Don't fiddle with the settings of the regulators! You need to have both plenty of experience of doing this work already and a high quality (expensive!) Moving coil voltmeter to make these adjustments and end up with a working regulator. As said in the linked article:-

"Voltage Regulator-Electrical Setting

It is important that only a good quality MOVING COIL VOLTMETER (0-20
volts) is used when checking the regulator. The pulsing nature of the voltage will
prevent a digital voltmeter from settling on a single reading"


The test meters most restorers have are simply not up to the job!
The best way to test the regulators is simply to swap them all into your car one by one and test the voltage at the battery with the engine running and the charging light out. A healthy 14 to 15 volts at the battery terminals and you know the regulator is good and properly set. Leave it like that! If you have one that needs adjustment, best left to a classic specialist auto electrician with a quality moving coil volt meter.
Cheers John - all comments IMHO
- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )
ImageImage
SUE482
Minor Fan
Posts: 293
Joined: Mon Aug 09, 2010 11:20 pm
Location: In the Middle
MMOC Member: Yes

Re: Regulator testing?

Post by SUE482 »

Put any of the 8 in and fit an alternator, no fuss, no problems and much better, that my opinion anyway.
Should be ready for tea time.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Regulator testing?

Post by bmcecosse »

I agree with CJ - test on the car is pretty much the only way.
ImageImage
Image
minor65
Minor Addict
Posts: 831
Joined: Sat Apr 03, 2010 9:55 am
Location: Lisburn, N Ireland
MMOC Member: No

Re: Regulator testing?

Post by minor65 »

He'd be fitting 6 alternators then :lol: :lol:

Post Reply