I bought him without a waterpump, but the heater was there, and also a clamp for a waterpump on the dynamo.[frame]
But I found a spare engine, with waterpump, is this the original one for the 1951, or is the after market original?[frame]
waterpump for sidevalve 1951
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
TvdWerf
- Minor Addict
- Posts: 553
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
waterpump for sidevalve 1951
What is the right waterpump for this car?
I bought him without a waterpump, but the heater was there, and also a clamp for a waterpump on the dynamo.[frame]
[/frame]
But I found a spare engine, with waterpump, is this the original one for the 1951, or is the after market original?[frame]
[/frame]
I bought him without a waterpump, but the heater was there, and also a clamp for a waterpump on the dynamo.[frame]
But I found a spare engine, with waterpump, is this the original one for the 1951, or is the after market original?[frame]
MM '51 LHD sidevalve 
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: waterpump for sidevalve 1951
The water pump on the dynamo is for the early USHM2 engine. This water pump is just for pumping hot (warm) water through the car heater. I have never been in a car with that pump so I do not know how effective it is.
The second pump is for the later USHM3 engine and fits instead of the blanking plate. The USHM3 engine will run with or without a water pump.
I have the fitting instructions for both pumps
The second pump is for the later USHM3 engine and fits instead of the blanking plate. The USHM3 engine will run with or without a water pump.
I have the fitting instructions for both pumps
[sig]3580[/sig]
-
TvdWerf
- Minor Addict
- Posts: 553
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
Re: waterpump for sidevalve 1951
Last Friday, I found 2 other MM's, one 1950 lowlight, with a strange pump on the dynamo, and a 1952, without heater, and without waterpump.[frame]
[/frame]
The lowlight is a belgium car, and was sold when I saw him.
The other one was also with a blank plate, just like my car was.
Because I have 2 blank plates, and one engine with pump, together with 2 1/2 engine, it looks like the original engine in my car did not have the pump when he left the factory.
And because the 1950 and 1952 MM in my area did not have the pump also, it looks like the waterpump was not a standard in the Netherlands...[frame]
[/frame][frame]
[/frame]
The green car was painted on a strange way, from a distance it was acceptable, but when you looked at the details....
The lowlight is a belgium car, and was sold when I saw him.
The other one was also with a blank plate, just like my car was.
Because I have 2 blank plates, and one engine with pump, together with 2 1/2 engine, it looks like the original engine in my car did not have the pump when he left the factory.
And because the 1950 and 1952 MM in my area did not have the pump also, it looks like the waterpump was not a standard in the Netherlands...[frame]
The green car was painted on a strange way, from a distance it was acceptable, but when you looked at the details....
MM '51 LHD sidevalve
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
TvdWerf
- Minor Addict
- Posts: 553
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
Re: waterpump for sidevalve 1951
Sorry, I did not wrote it on paper, only took some pictures from the engine bay without thinking about it ;)
It is one hour from my home, I was there in that area for my job ;)
This is the lowlight:
http://www.marktplaats.nl/a/auto-s/oldt ... =mympBuyer
and this a picture from the plates in engine bay, I did not realized it was unreadable until I was at home[frame]
[/frame][frame]
[/frame][frame]
[/frame]
But the phone number from the salesman is readable in the advertisment.
It is one hour from my home, I was there in that area for my job ;)
This is the lowlight:
http://www.marktplaats.nl/a/auto-s/oldt ... =mympBuyer
and this a picture from the plates in engine bay, I did not realized it was unreadable until I was at home[frame]
But the phone number from the salesman is readable in the advertisment.
MM '51 LHD sidevalve