Help with heater valve.

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
amgrave
Minor Addict
Posts: 985
Joined: Mon May 26, 2014 3:26 pm
Location: North Kent
MMOC Member: No

Help with heater valve.

Post by amgrave »

I have a 63 saloon with the round heater and a control for fresh or interior air. A previous owner has fitted the new type of heater control to the rear of the head, the one with the lever. It has not got a cable connecteted to it but has a piece of thick wire through the lever hole and held under the cable clamp loose enough to move it back and forth :roll: . Can someone tell me if the control is open when the lever is toward the valve body or away from it. At a later date I might add a cable to operate it from the seat. Many thanks.
Andy
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Help with heater valve.

Post by bmcecosse »

Test it by feeling the pipes! But straight up should be open.....where it should be left 365 days of the year - to keep water flowing round the back of the engine - and the heater. No need for a cable...
ImageImage
Image
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Help with heater valve.

Post by mike.perry »

The Knob for that valve has PUSH FOR HEAT stamped on it
[sig]3580[/sig]
amgrave
Minor Addict
Posts: 985
Joined: Mon May 26, 2014 3:26 pm
Location: North Kent
MMOC Member: No

Re: Help with heater valve.

Post by amgrave »

mike.perry wrote:The Knob for that valve has PUSH FOR HEAT stamped on it
Thanks mike.perry that's answered my question nicely :D
Good point BMC, on hot day's (remember them) I'll just open the windows.

Post Reply