803/948 gearbox conversion finished

[martin418]

my 948 into 803 gearbox conversion is now in and working fine after the clutch slip saga , a new borg and beck clutch kit sorted it out , the old but new looking clutch was a recon unit and the pressure plate had been ground very thin when compared to a new unit , also now the gears change even better as i suspect the clutch was also dragging slightly, so ' orrace' is now useable , i have a 1098 engine with a 4.22 diff and the 948 gear ratios feel good , it pulls very well and appears to not be reving to hard at speed , thanks to all the members for all the help ,

[bmcecosse]

Well done - great success!