ignition question

[minormonkey]

Looked everywhere but can't find an answer, gonna try and keep it simple...

Fitting electronic ignition kit (comes with new coil)
Cars wired negative earth
25D distributor
Current coil is Lucas (sw/cb type)
Low tension wire from dizzy goes to coil SW (positive)
White wire from loom goes to CB (negative)

Now, the kit says fit red to positive, along with ignition wire,
So, can I just swap the white wire from loom to positive on the new coil?

[aupickup]

what make is it

[minormonkey]

Its a Powerspark kit

[minormonkey]

Being changed to negative earth,the wires would have been switched on the coil right?
Making the SW negative instead of positive
And CB now positive instead of negative.

Does that sound correct?
I dont want to damage the new kit wiring it wrong.

[katy]

Being changed to negative earth,the wires would have been switched on the coil right?

That's correct.

[minormonkey]

Thankyou Katy,
Not the greatest with electrical stuff,as you can probably tell.

All sorted now and running again.

Thanks again. ;)

[bmcecosse]

IS the car negative earth now? The kit will be for a negative earth system.

[katy]

Cars wired negative earth

[bmcecosse]

The 'IS' was in caps - suggesting a double check should be carried out.....