Body Repair Panels...

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Welung666
Minor Legend
Posts: 1354
Joined: Fri Sep 24, 2004 7:06 am
Location: West Midlands
MMOC Member: No

Body Repair Panels...

Post by Welung666 »

Hey everyone :)

Now I've got Doris mostly stripped out, it's about time I stated getting in repair panels so I can start brushing out the rust (and I mean brushing as most of her floor and inner wings etc are mainly rust and air!!!) and stitching in new panels ready for a thick coat of anti-rust primer. Any ideas where I can order good quality repair panels? Preferably not the paper thin pressings but decent guage steel panels that are likely to slightly resemble the correct shape :roll:

I have had a quick look through ESM's repair panels and worked out that I won't be far off a thousand quids worth of panels :cry: but still if I want Doris to last another 35 years I gotta do it properly!!

Thanks in advance

Lee (& Doris)
Top
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

Same here mate. I need the same for my '52 and want it to last as long as possible as well.

So come on folks! Where are the best panels available from?
Top
Welung666
Minor Legend
Posts: 1354
Joined: Fri Sep 24, 2004 7:06 am
Location: West Midlands
MMOC Member: No

Post by Welung666 »

In case anyone fancies a good session of tutting and sharp intakes of breath through their teeth I've put the pics of what I found under the 4 wings up on my website link, not for the feint hearted though!!
Top
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

I've got toothache now with all the cold air drawn over them!!!! :lol: :lol:

Nah, I've seen worse, and Ray's bought worse!!! :lol:

We all like a challenge! :wink:
Top
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Post by rayofleamington »

Well Lee - not all of it needs complete panels, but it's up to you really.
The rear wing seam is a pig of a job, and ith the state of the A-posts etc.. you'd have to have a really good reason to do all that wark :-?
Top
Welung666
Minor Legend
Posts: 1354
Joined: Fri Sep 24, 2004 7:06 am
Location: West Midlands
MMOC Member: No

Post by Welung666 »

Cam wrote:and Ray's bought worse!!! :lol:
True, there's only the paint holding the Raymobile together :P :lol:

As for the challenge, I wouldn't have got me a mog if I didn't like a challenge :P I'd have got a rot proof eurobox with all the electronics ready to go wrong on me when I need it most :P At least with a mog, unless it's something drastic, I can repair it myself roadside if necessary!
Top
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Post by rayofleamington »

True, there's only the paint holding the Raymobile together
nah - the paint is worse than the rest of the car, and that is really saying something!! :lol:
Ray. MMOC#47368. Forum moderator.

Jan 06: The Minor SII Africa adventure: http://www.minor-detour.com
Oct 06: back from Dresden with my Trabant 601 Kombi
Jan 07: back from a month thru North Africa (via Timbuktu) in a S3 Landy
June 07 - back from Zwickau Trabi Treffen
Aug 07 & Aug 08 - back from the Lands End to Orkney in 71 pickup
Sept 2010 - finally gave up breaking down in a SII Landy...
where to break down next?
2013... managed to seize my 1275 just by driving it round the block :(
Top
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

You LOVE it!! :lol:
Top
bigginger
Minor Maniac
Posts: 5928
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Post by bigginger »

Yup, seen and bought much worse - you're quite lucky no-one's tried to repair things with random gauge steel patches! Mind you, these things always look worse in the flesh than in the photo - good luck.
Top
newagetraveller
Minor Fan
Posts: 365
Joined: Wed Feb 13, 2002 12:00 am
Location: Huntingdon
MMOC Member: Yes

Post by newagetraveller »

If you have the patience it is possible to acquire panels from ebay although the postage costs can be prohibitive.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MEWA:IT
Top
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

OY! I'm watching that!! :wink: :lol:
Top
Post Reply

Return to “Bodywork”