bonnet badges

Post by **samuria** » Thu Apr 24, 2014 1:34 pm

has anyone refurbished their badges?

if so how was it done and what paint
was used

thanks

Post by **andy.pointeer** » Thu Apr 24, 2014 3:01 pm

I have only repainted the red in the badge below, using a small artist brush

I used Humbrol Enamel Modelling Paint - Red Gloss Nº:19[frame]

[/frame]

Post by **samuria** » Thu Apr 24, 2014 8:26 pm

andy.pointeer wrote:I have only repainted the red in the badge below, using a small artist brush

I used Humbrol Enamel Modelling Paint - Red Gloss Nº:19[frame][/frame]

looks good
thanks for the tip

Post by **bmcecosse** » Thu Apr 24, 2014 9:10 pm

Snap!

Post by **jagnut66** » Thu Apr 24, 2014 10:39 pm

Hi,
I did mine with Humbrol enamel also. A very cheap and easy way of refurbishing the bonnet badge, with a very acceptable end result.
Best wishes,
Mike.

Post by **samuria** » Fri Apr 25, 2014 2:35 pm

anyone know which blue is
used on the emblem badge

Post by **samuria** » Sat Apr 26, 2014 9:30 pm

which blue for emblem badge

Post by **andy.pointeer** » Sat Apr 26, 2014 10:11 pm

I have not done the badge that has blue on it, but looking at Humbrol colour chart it looks like gloss Sea Blue 47 or Medteranean Blue 48.

Link to Chart can be found at https://www.humbrol.com/humbrol-wallchart/

You then just need to find local model shop that sells the paint

Hope this help

Post by **samuria** » Sun Apr 27, 2014 6:37 am

thanks andy

Morris Minor Owners Club

bonnet badges

bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges

Re: bonnet badges