New Fuse box?

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Multiphonikks
Minor Addict
Posts: 720
Joined: Mon May 24, 2004 12:32 pm
Location: Bristol
MMOC Member: No

New Fuse box?

Post by Multiphonikks »

Hi everyone!

Well, now I've got the new laptop (a long long story involving hot chocolate so we won't go there...) I have the internet up and running again so...

I'm planning a few changes to Hebe's electrical system.

As of tomorrow I hope to put our old 6GB creative Jukebox in Hebe in the Glovebox. I'm contemplating fusing the system seperately and removing the original fuse box (partly because the thing is very temperemental and I've had to stop once or twice before to wiggle fuses when the indicators or wipers or sidelights or radio have stopped working. And no, they're not all on the same fuse; the radio is on the unswitched circuit. :)

Any recommendations for good fuseboxes? In fact, I'm even contemplating a resite of the fuses to the inside of the car, but that'll probably wait until I've stripped her and put a new loom in :)

I'm thinking any spade based system would be okay, but how many fuses??? I'm thinking that a 6 or 8 fuse box would be quite good (I do have plans for the halogen lights and heated rear window) so it'd give me some room for them...

Nikki
<img src="http://www.aminorjourney.com/webcam.jpg" width="200">

[url=http://www.aminorjourney.co.uk/wordpress/]A Minor Journey[/url] A neogreen musician, her girlfriend and a cast of thousands!
Keep track of the restoration with the live webcam!
bigginger
Minor Maniac
Posts: 5928
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Re: New Fuse box?

Post by bigginger »

Multiphonikks wrote:
Well, now I've got the new laptop, I have the internet up and running again
So it's you who's in charge of it - I'd always wondered...
Alec
Minor Legend
Posts: 2148
Joined: Thu Apr 15, 2004 7:29 am
Location: Oswestry, Shropshire
MMOC Member: No

Post by Alec »

Hello Nikki,

the easiest way to replace the existing fuse box is with a new one of the same type. However as you are thinking of more circuits try this company, http://www.vehicle-wiring-products.co.uk/, they have a good stock range and also sell the correct coloured wire by the metre. If you are considering fusing the head lights then this is quite a big job to do it in the safest way, i.e. with a fuse for each filament. If you fuse just the headlight supply (blue feed) then should that fuse blow while you are driving at night you have no headlights, quite scary.

Alec
Multiphonikks
Minor Addict
Posts: 720
Joined: Mon May 24, 2004 12:32 pm
Location: Bristol
MMOC Member: No

Post by Multiphonikks »

Alec wrote:Hello Nikki,

the easiest way to replace the existing fuse box is with a new one of the same type. However as you are thinking of more circuits try this company, http://www.vehicle-wiring-products.co.uk/, they have a good stock range and also sell the correct coloured wire by the metre. If you are considering fusing the head lights then this is quite a big job to do it in the safest way, i.e. with a fuse for each filament. If you fuse just the headlight supply (blue feed) then should that fuse blow while you are driving at night you have no headlights, quite scary.

Alec
Hi Alec, If I put halogens in I'd probably put a relay in (as with the rear heated window)
bigginger wrote:So it's you who's in charge of it - I'd always wondered...
ssssh! No-one must know! :D
<img src="http://www.aminorjourney.com/webcam.jpg" width="200">

[url=http://www.aminorjourney.co.uk/wordpress/]A Minor Journey[/url] A neogreen musician, her girlfriend and a cast of thousands!
Keep track of the restoration with the live webcam!
Alec
Minor Legend
Posts: 2148
Joined: Thu Apr 15, 2004 7:29 am
Location: Oswestry, Shropshire
MMOC Member: No

Post by Alec »

Hello Nikki,
a relay is not necessary if you use Halogens of the same rating as the Sealed Beams. That is what I fitted on my Wife's Traveller.
A relay in it's self will not improve light output but does lessen the load on the light switches. (at the expense of something else to go wrong)

Alec
Multiphonikks
Minor Addict
Posts: 720
Joined: Mon May 24, 2004 12:32 pm
Location: Bristol
MMOC Member: No

Post by Multiphonikks »

Hi Alec,

Yeah... I wasn't worried on the light output... but I was worried about burning the switch. I mean, it is getting on in years so I wanted to give it an easy time!

:)
<img src="http://www.aminorjourney.com/webcam.jpg" width="200">

[url=http://www.aminorjourney.co.uk/wordpress/]A Minor Journey[/url] A neogreen musician, her girlfriend and a cast of thousands!
Keep track of the restoration with the live webcam!
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Post by rayofleamington »

I was worried about burning the switch. I mean, it is getting on in years so I wanted to give it an easy time!
surely the cheaper / quicker / easier option would be just to replace the switch?
woo
Minor Fan
Posts: 190
Joined: Sun Jul 04, 2004 3:26 pm
Location: S. E. Essex
MMOC Member: No

Post by woo »

Nicki,

There is no reason why you shouldn't replace the existing fuse box if you want to, as long as you remember that it also acts as a junction box for the Petrol Pump, Coil and Dizzy.

In a moggy there are basically four types of circuit.

1. Is Unfused and comes Directly from the A1 terminal on the Control Box to provide all the Head, Side and Interior Lighting.

2. Is Fused and comes Directly from the A2 terminal on the Fuse Box to control the Horn.

3. Is Unfused and comes from the A3 terminal (acting as a Junction Box) on the Fuse Box, via the Ignition Switch, to run Petrol Pump, Coil and Dizzy.

4. Is Fused and comes from A4 terminal on the Fuse Box, via the Ignition Switch, to run Wipers, Heater, Fuel Gauge,Brake Lights and Indicators.


The issue with fusing the headlights is that, as has been previously said, Unless each element is individually fused, Blowing one fuse will also take out any other lights dependent on it.

I have been using Halogen Headlights for two years now without a problem. The Headlight switch is built like a battleship and will easily take any extra load.

Also, if you do go along this path, you need to remember that the Live side of the Headlight Switch also acts a junction box for the Brown/Blue wire that goes on to the Live side of the Ignition Switch.

A while back I sourced, and modified to suit a Moggie, some diagrams of each type of circuit to help me work out what was going on. They are for the moggie (61-63) with the Direction Indicator Relay Unit, but if it would help you I'll make a copy of them available to you. Only if you do end up referring to them remember Caveat Emptor!

Robin
bigginger
Minor Maniac
Posts: 5928
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Post by bigginger »

That sounds invaluable. Are you going to shove them up on the web somewhere? If not, could I blag a copy?
a
forbesg
Minor Fan
Posts: 103
Joined: Wed Apr 21, 2004 1:55 am
Location: Christchurch, New Zealand
MMOC Member: No

Post by forbesg »

Multiphonikks wrote:Hi Alec,

Yeah... I wasn't worried on the light output... but I was worried about burning the switch. I mean, it is getting on in years so I wanted to give it an easy time!

:)
My 54 series II has dirty big contacts on the light switch and I run 95/105 Hellas with no relay for about 10 years. No worries. Age should not be a problem, but I suspect that the later models series III & IV have much smaller contacts - thus a relay is probably required.

Good luck!
woo
Minor Fan
Posts: 190
Joined: Sun Jul 04, 2004 3:26 pm
Location: S. E. Essex
MMOC Member: No

Post by woo »

Bigginger,

I've sent you a PM

Robin
bigginger
Minor Maniac
Posts: 5928
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Post by bigginger »

Robin, something spooky going on, I didn't get one!
woo
Minor Fan
Posts: 190
Joined: Sun Jul 04, 2004 3:26 pm
Location: S. E. Essex
MMOC Member: No

Post by woo »

Bigginger

I've tried again.

Robin
JustinMinor1000
Minor Fan
Posts: 216
Joined: Thu May 27, 2004 8:35 pm
MMOC Member: No

Re: New Fuse box?

Post by JustinMinor1000 »

Multiphonikks wrote:Hi everyone!

Well, now I've got the new laptop (a long long story involving hot chocolate so we won't go there...) I have the internet up and running again so...

I'm planning a few changes to Hebe's electrical system.
Nikki
Nikki ...

This is what i did to Mirium ..

Image

In the same way as you were scared of burning out the lightswitch I was worried about burning out the ignition switch.

The coil and the relay are switched by the ignition switch.

All other switched items are via the relay which has a seperate supply from the starter solenoid.

the two taped up wires are spare feeds.

There are also two wires for the interior light that are not connected ..
Post Reply