Which Jubilee clips for corrugated air intake pipe.

[bluegrass]

I am missing the two Jubilee clips holding down the large corrugated air intake pipe in the engine bay.

Does anyone know which clips and size are best.

Thanks for any help.

[bigjim]

cable tie ?

[lambrettalad]

BIG ONES They sell large ones in machine mart

[POMMReg]

Not Jubilee clips!

Just a metal loop affair with an annoyingly sml bolt to secure.

[MarkyB]

I think you can manage fine without a clip at all!

[philthehill]

If it is the clip securing the heater air inlet pipe in the engine bay they are available from Moss Europe Pt No: AHH5714. The bolt, washers and nut are also available from Moss Europe.
http://www.moss-europe.co.uk/Shop/ViewP ... dexID=1424 Item No: 103
I know it is MG/Sprite but I am pretty certain that the heater air inlet pipe in the engine bay is the same diameter as the Minor.

[simmitc]

Those are the straps that hold the pipe to the inner wing. What I want is the the clips that secure it at each end to (a) the front panel, and (b) the heater. A well known supplier claims to offer the clips, but they are nothing like the originals - twice as broad, twice as thick, and secured by turning what looks like a sardine key! I sent them back. If anyone finds the correct article, I'd be delighted to know about it.

[mike.perry]

BIG ONES They sell large ones in machine mart

Or join 2 shorter ties

[les]

He said he wanted the clips holding the pipe down, which would be the ones shown in Phils link.

[bluegrass]

Thanks for the posts...yes its the ones holding the pipe down, so I'm delighted for link.
Much appreciated.!