Hi and a merry christmas to all. Was a gasket or some sort of seal fitted between the cover and floor if so what was it made of, I trust sombody will have an answer, thanking you in anticipation.
nearsidenellie
Gearbox Cover
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
nearsidenellie
- Minor Friendly
- Posts: 31
- Joined: Mon May 12, 2008 10:20 am
- Location: essex
- MMOC Member: Yes
-
DAVIDMCCULLOUGH
- Minor Legend
- Posts: 3010
- Joined: Sun Sep 09, 2007 10:42 pm
- Location: Whiteabbey, Co Antrim
- MMOC Member: Yes
Re: Gearbox Cover
Yes a non setting sealant like Dum Dum would have been used to keep the water out, same as is used on the back panels of a traveller.
http://morrisminorspares.co.uk/shop/pro ... 66ced3b1b4
http://morrisminorspares.co.uk/shop/pro ... 66ced3b1b4
Too many Minors so little time.....
-
smithskids
- Minor Addict
- Posts: 621
- Joined: Wed Sep 05, 2012 9:32 pm
- Location: East Yorkshire
- MMOC Member: Yes
Re: Gearbox Cover
I have an old roll of 1" wide cork jointing 2mm thick and stick it to the cover, it works ok and keeps the water out. when you remove thr cover the jointing stays stuck to it so its easy to clean or renew. 