some things gone wrong!!!

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: some things gone wrong!!!

Post by bmcecosse »

Madness! I've given away FREE Mini 998 heads (and in one case a complete engine) - exactly the same spec (valve sizes etc) as the 948 head, and supposedly 'unleaded' if from a mid 80's engine. Although there is much doubt about exactly how it was 'unleaded'. Certainly the valves are better spec.... perhaps that's all...
ImageImage
Image
les
Minor Maniac
Posts: 9190
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: some things gone wrong!!!

Post by les »

Well I saw one for £40 and another for £29, that's what prompted me to tell you.

Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: some things gone wrong!!!

Post by Morrisminormo »

Hi
Yes seen them in the end, I have taken my head in this morning. Had skim ( only to make face true) crack test, new valves and unleaded seats £150 . Looks like I will be keeping this head for a while :wink:
I do lots of 60mph motorway driving every day so will benefit in the long run. So will be fitting it Saturday morning :D
It's a quick fix so that will do me for now.
Every day is a day closer to death, live for today for soon be forgotten :-(

Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: some things gone wrong!!!

Post by Morrisminormo »

[frame]Image[/frame][frame]Image[/frame]
Every day is a day closer to death, live for today for soon be forgotten :-(

Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: some things gone wrong!!!

Post by Morrisminormo »

[frame]Image[/frame]
Every day is a day closer to death, live for today for soon be forgotten :-(

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: some things gone wrong!!!

Post by bmcecosse »

And this time - set the valve gaps to 12 thou inlet and 15 thou exhaust - retorque (44 ftlbf) the head after the first heat cycle , and then reset the gaps of course - and CHECK THEM every 3000 miles !!
This head would have been fine http://www.ebay.co.uk/itm/Classic-Mini- ... 19e5c690af although expensive postage (and ignore the crazy buynow price..)
ImageImage
Image
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: some things gone wrong!!!

Post by Morrisminormo »

I will check them religiously this time. I had to have four new exhaust valves, two was burned out. But they did say they were very thin ( worn) The buy it now price of£220 is a little steep :roll:
Can't wait to get my car up and running again! Been nearly a week now :x

Thanks
Last edited by Morrisminormo on Thu Dec 05, 2013 11:16 pm, edited 1 time in total.
Every day is a day closer to death, live for today for soon be forgotten :-(

Sips
Minor Friendly
Posts: 36
Joined: Sun Dec 01, 2013 8:25 pm
Location: Bristol
MMOC Member: No

Re: some things gone wrong!!!

Post by Sips »

I am in the process of doing the head gasket on mine - thanks to the advice of BMC (who was spot on with the diagnosis!) Mog has now been off the road for 4 days, what has amazed me is how much I miss driving her when I can't.

I guess it is a case of you don't know what you have until it is gone! Or in the case temporarily unavailable!

Good luck with the refit, we will probably both be turning wheels at the same time!

Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: some things gone wrong!!!

Post by Morrisminormo »

Yes good lick too you

Hope it all goes the way we want it to :lol:
Every day is a day closer to death, live for today for soon be forgotten :-(

Post Reply