water pump

Post by **samuria** » Tue Sep 10, 2013 8:49 pm

anyone recommend where to buy one?
its for a 1098...
i've seen so many on fleabay all at very different prices

or are they all from the same manufacture.
don't want to fit one and only lasts a few months or so.
thanks

Post by **bmcecosse** » Tue Sep 10, 2013 10:25 pm

Either take a chance on ebay - or just get one from your local autoparts place - at least you won't pay carriage that way.. Mini 998 pump is the one you want.

Post by **M25VAN** » Wed Sep 11, 2013 7:39 am

And when you find one check the flange surface. QH a while back started to use a wierd beaded style flange that wasn't flat.

Sealed OK but just didn't look right.

Post by **samuria** » Sat Sep 14, 2013 10:00 pm

the old pump had a cast impeller..
some i've seen have a pressed steel one?
also been ask if i want a gwp 132 small impeller
or a gwp134 large impeller?
took the old one with me but they said
(will have to order one)
and they had no idea

Post by **JOWETTJAVELIN** » Sat Sep 14, 2013 10:34 pm

Club Spares have NOS water pumps, see the most recent Minor Matters.

Post by **bmcecosse** » Sat Sep 14, 2013 11:54 pm

Large impeller is for 1275 engine.

Post by **M25VAN** » Sun Sep 15, 2013 5:58 pm

Isn't the small impeller for the 948 and the large for the 1098? Have a look on ESM and Bull Motif sites. I think I have the large impeller version in my 1098. If your spares shop don't know then buy from one of the specialist suppliers?

Post by **bmcecosse** » Sun Sep 15, 2013 10:31 pm

You 'may' get away with the large impeller in a later 1098 block (and you may not!) - but it was designed for the 1275.

Post by **samuria** » Sun Sep 15, 2013 10:37 pm

i am getting one with the cast impeller (small)
the same as the one i had to remove.....

thanks for the advise roy

Post by **bmcecosse** » Mon Sep 16, 2013 12:07 am

It's perfectly satisfactory for a 948......Be sure to fit a NEW solid wall (ie not convoluted) bypass hose at the same time.

Post by **M25VAN** » Mon Sep 16, 2013 6:38 am

samuria wrote:i am getting one with the cast impeller (small)
the same as the one i had to remove.....

Oh, if you had the small impeller then replace with a small impeller. You know that will fit.

bmcecosse wrote:You 'may' get away with the large impeller in a later 1098 block (and you may not!) - but it was designed for the 1275.

This is to do with clearance in the block because the large impeller protrudes a bit further? I wonder how many people get caught out with that.

Post by **samuria** » Mon Sep 16, 2013 10:01 am

bmcecosse wrote:It's perfectly satisfactory for a 948......Be sure to fit a NEW solid wall (ie not convoluted) bypass hose at the same time.

yes i will use a bit of heater hose..

Post by **samuria** » Mon Sep 16, 2013 8:40 pm

got my water pump...( £14.70 which i thought was cheap

)
the same as removed. i went to D.S.N in attleborough.
the guy said he has had a few large impeller ones returned
due to fitting problems.. but not that many.
thanks for the feedback guys

Post by **bmcecosse** » Mon Sep 16, 2013 8:44 pm

Yes - I think DSN are much overlooked as suppliers - I used to buy Mini bits from him, and was always pleased with the service -and the prices.

Post by **samuria** » Mon Sep 16, 2013 8:50 pm

i live about 17 miles from there...
they have a good online shop aswell...
(which i did not know about

)

Morris Minor Owners Club

water pump

water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump

Re: water pump