948cc with big bore?

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

948cc with big bore?

Post by Morrisminormo »

Hi

I have a standard 1956 car with a standard 948cc engine.

Would it be possible to fit a large bore exhaust system to it without changing exhaust manifold? I could weld the bigger bore section to the existing down pipe? If its not possible and I change the exhaust manifold would I have performance issues with the engine as its not modified in any way?

I love the sound of my car but wish it was a little louder :D

If I replaced the exhaust with a bigger diameter pipe and kept the centre box where it was would it still give me the Morris minor fart..?

I have read on this forum that if you buy a big bore exhaust from the usual places, they come with a back box and this gets rid of the Morris minor fart.....??

Cheers
Every day is a day closer to death, live for today for soon be forgotten :-(

chrisryder
Minor Legend
Posts: 2217
Joined: Mon Nov 15, 2010 11:44 pm
Location: West Midlands UK
MMOC Member: No

Re: 948cc with big bore?

Post by chrisryder »

If you want to keep the sound, but have it louder. Buy a new 'standard' stainless system. Bolts straight onto the standard manifold, and will certainly be louder than the sooted-up system on at the moment. A new one will still quieten down with time as it gets more and more sooty inside.
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: 948cc with big bore?

Post by Morrisminormo »

Hi
Could try that, I would like a more permanent solution though 8)
Every day is a day closer to death, live for today for soon be forgotten :-(

MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: 948cc with big bore?

Post by MarkyB »

Replace the silencer with a cherry bomb?
http://www.ebay.co.uk/sch/Vehicle-Parts ... herry+bomb

No way of telling if it will still make the traditional noise though.

"Once you break something you will see how it was put together"
cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Iv just bought a cherry bomb, £37 delivered should be here on monday so ill let you know how i get on.
cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Not a great video and he didnt really put his foot down but check these out.
http://www.youtube.com/watch?v=5up1JWGXMHI
http://www.youtube.com/watch?v=xLYLj34093k
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: 948cc with big bore?

Post by bmcecosse »

You actually spent £37 to make a bog standard 948 Minor sound a bit louder?? :roll: :roll: :(
ImageImage
Image
cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

yeah why not? not like i spent £100s on a full stainless or anything. Thought id see what its like for the little money it cost
Lee Kramer
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: 948cc with big bore?

Post by Morrisminormo »

Let me know how you get on :D

You must be like me, a little mad :roll:

Good luck
Every day is a day closer to death, live for today for soon be forgotten :-(

Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: 948cc with big bore?

Post by Morrisminormo »

bmcecosse wrote:You actually spent £37 to make a bog standard 948 Minor sound a bit louder?? :roll: :roll: :(
What would you suggest??? :roll:
Every day is a day closer to death, live for today for soon be forgotten :-(

cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Morrisminormo wrote:Let me know how you get on :D

You must be like me, a little mad :roll:

Good luck
Yeah ill let you know how i get on and post a vid or something it you like.
I notice from the top of your post you say your car is totally standard. Same as mine then just a different year. What are you breaks like because my are pretty bad and need to use the gears more than id like to slow down lol.
I might look at changing them out pretty soon i dont know yet.
Lee Kramer
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: 948cc with big bore?

Post by Morrisminormo »

Mine are the 7 inch drums, and if I'm honest they stop the car very well :roll:
I have only suffered from brake fade a few times, but that was when I just spotted the turn I needed and slammed them on :lol:

Are you putting the bomb on the back like the video? Or are you replacing the center box?

On my last Moggy I removed the box completely and it sounded awful. It wasn't so much loud it was a horrible tone on acceleration. So I cut my center box in two, removed the baffles and welded it back together, that sounded nice but not much louder.
Every day is a day closer to death, live for today for soon be forgotten :-(

cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

The box being so close to the manifold is what gives it the morrris fart so ill prob keep that on and just pit it on the back like tjat video see what happens. Not a lot of money so no biggy if i don't like it. No real videos on YouTube so ill put a dent one on. I have a channel but never uploaded to it so this could be the start
Lee Kramer
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: 948cc with big bore?

Post by bmcecosse »

Adding a stupidly expensive extra silencer to your car is going to make it quieter - and probably lose you some power too.......not quite what you are after, I suspect? What do I suggest - you ask? I suggest you put the engine in to good order (sorting out the oil pressure as top priority) , increase the power by fitting a camshaft from a 1098 engine, and a 940 cylinder head from a 1275 - with larger carb and decent inlet manifold..... With the standard exhaust - that will be 'louder' if that's what you want..and it will GO much better too. However - it becomes apparent from your post , that your first priority must be the 'breaks' (sic) - so you can actually stop.....Before you kill yourself, and possibly others....:o
ImageImage
Image
cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Put a vid on youtube but cant send the link on my phone. Soumds nice but sound didmt record too great. See what you think
Lee Kramer
Morrisminormo
Minor Fan
Posts: 223
Joined: Thu May 23, 2013 7:20 pm
Location: Staffordshire
MMOC Member: No

Re: 948cc with big bore?

Post by Morrisminormo »

What am I searching for?.
Every day is a day closer to death, live for today for soon be forgotten :-(

cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Iv commented on your fish tank video with the same user name. But its under 1969 morris 1000 with cherry bomb. Ill try get a better sounding one tomorrow
Lee Kramer
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: 948cc with big bore?

Post by MarkyB »

Here it is;

http://www.youtube.com/watch?v=gwV690-D1OU

Hard to make out the exhaust over the clattering of the engine but it does seem to have added a certain something.

"Once you break something you will see how it was put together"
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: 948cc with big bore?

Post by bmcecosse »

:o :roll:
ImageImage
Image
cyclomethicone
Minor Friendly
Posts: 48
Joined: Sat Sep 14, 2013 5:07 am
Location: Wiltshire
MMOC Member: No

Re: 948cc with big bore?

Post by cyclomethicone »

Lol ill try and get s better sound quality video
Lee Kramer
Post Reply