su h2 carb seals

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
boydogs
Minor Friendly
Posts: 79
Joined: Mon Jan 28, 2013 2:16 pm
MMOC Member: No

su h2 carb seals

Post by boydogs »

I have just bought a battery and tried to start the engine for the first time in 15 years, I noticed petrol coming from under needle jet nuts, i took the jet assembly apart and found the 2 rubber glands and the sealing washers need renewing, could i buy these items seperately or do i have to buy full carb kit . SU H2 11/4" throttle off a 1958 950 saloon. Most important is where to aquire them, Doe`s the club have these ? i havn`t bought any spares from the club jet. Boydogs
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: su h2 carb seals

Post by mike.perry »

Available as a kit from Club Spares or Burlen Fuels 01722 412500
[sig]3580[/sig]
boydogs
Minor Friendly
Posts: 79
Joined: Mon Jan 28, 2013 2:16 pm
MMOC Member: No

Re: su h2 carb seals

Post by boydogs »

I I have just been given a HS2 carb complete which was taken off a running car,if i fit this carb to my 950 engine, will i have to change anything or will it be a staight swop. The carb on car now is a H2.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: su h2 carb seals

Post by bmcecosse »

Swap the needle..... although difference will be minimal...
ImageImage
Image
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: su h2 carb seals

Post by mike.perry »

Both carbs use an M needle
[sig]3580[/sig]
Post Reply