Hi
Can anyone give me some advice on how to remove surface scratches on the side windows of my Morris?
Thanks
Scratches on side windows
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 57
- Joined: Mon Feb 13, 2012 8:16 am
- Location: South Africa
- MMOC Member: No
Re: Scratches on side windows
Depends on how deep the scratches are but there are some tips in this thread: http://www.mmoc.org.uk/viewtopic.php?f= ... ow+scratch
Eric - 1971 Traveller
-
- Minor Friendly
- Posts: 25
- Joined: Fri Apr 02, 2010 8:06 am
- Location: YORK
- MMOC Member: No
Re: Scratches on side windows
Have you tried this type of glass polishing compound?
I used this on our ford fiesta using a cordless 12v drill and it works well.
You do have to be patient and not 'overdo' it as you can distort the glass if it gets hot!
http://www.ebay.co.uk/itm/GLASS-POLISHI ... 1392?pt=UK
I used this on our ford fiesta using a cordless 12v drill and it works well.
You do have to be patient and not 'overdo' it as you can distort the glass if it gets hot!
http://www.ebay.co.uk/itm/GLASS-POLISHI ... 1392?pt=UK
-
- Minor Friendly
- Posts: 57
- Joined: Mon Feb 13, 2012 8:16 am
- Location: South Africa
- MMOC Member: No
Re: Scratches on side windows
Hi
Thank you very much for the information. The scratches do not seem to be too deep.
I am definitely going to try it.
Regards
Robert
Thank you very much for the information. The scratches do not seem to be too deep.
I am definitely going to try it.
Regards
Robert
Re: Scratches on side windows
Side windows are plentiful - it will be easier to simply swap in good ones......



Re: Scratches on side windows
Maybe not so plentiful in S.Africa Roy.bmcecosse wrote:Side windows are plentiful - it will be easier to simply swap in good ones......
Eric - 1971 Traveller
Re: Scratches on side windows
Hahahaha - didn't notice that....
Still - they are just flat glass - so any aouto-glass place should be able to cut new ones from sheet very easily.......



