smoke on start up

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
dalebrignall
Minor Legend
Posts: 2528
Joined: Fri Aug 03, 2007 4:06 pm
Location: stalbans
MMOC Member: No

smoke on start up

Post by dalebrignall »

my girlfriends 2 door is on its origional engine and it runs and drives really well .it has always smoked a bit on start up,then after 2 mins or so the smoke goes .is this the valve guides giving up the ghoast .the oil useage is about half a litre of oil every 400 miles so thats not too bad .it it needs valve guides would it be benificial to change the cylinder head and if so is it easy to do i only have basic skills and dont want to muck it up . :D
[sig]5641[/sig]
aupickup
Minor Maniac
Posts: 6004
Joined: Tue Jul 20, 2004 11:41 pm
Location: lanark
MMOC Member: No

Re: smoke on start up

Post by aupickup »

its easy to change the head
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: smoke on start up

Post by MarkyB »

It's pretty easy to replace valve guides too, hammer, drift and a ruler should be enough.

"Once you break something you will see how it was put together"
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: smoke on start up

Post by bmcecosse »

It needs to be a stepped drift - and even then - you will need to de-burr the top edge. My advice - do nothing - the oil consumption is acceptible as it is.....
ImageImage
Image
Post Reply