Borg & Beck clutch

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
flymike
Minor Friendly
Posts: 10
Joined: Sun Mar 11, 2007 1:15 pm
Location: Leicestershire
MMOC Member: No

Borg & Beck clutch

Post by flymike »

Hi Chaps

i was recently given a (NOS) Borg & Beck Clutch Drive Plate Part Number 50908/12 still in it's box with 2 sets of fitting instructions...i had hoped that this would fit my 1968 Minor......however it does not.

can anyone tell me what car it will fit..??

i was also given a QH clutch plate HB 2426 (wrote on side of box) but i think the part number C 942S...this i think will fit a Morris Ital 1.3 1980-...Layland 7, 10 cwt, Marina Van Pick-up 1972-....and a Marina 1.3 1972-80....

these parts are useless to me..so if anyone wants them then the can have them..ideally swap for any Minor parts....??? brake parts or front suspension parts. or just come and get them if you need them because i don't

Cheers :D
Mike (Leicestershire)

ps i was also given a load of (NOS) still in boxes Austin 1100 rear brake shoes..again ideally swap for any brake related Minor Parts..???
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

Put em on ebay!
ImageImage
Image
bbeunen
Newbie
Posts: 1
Joined: Thu Aug 15, 2013 9:24 am
MMOC Member: No

Re: Borg & Beck clutch

Post by bbeunen »

Hello i find in google this old message about the clutch-plate BORG & BECK 50908/12.
Do you still have this clutch-plate??????
If yes than i would like to buy it, if no than i would like to ask you if you can help me to get or find one.

Best regards Ben
ASL642
Minor Maniac
Posts: 5200
Joined: Sat Oct 20, 2007 3:14 pm
Location: Warwickshire
MMOC Member: No

Re: Borg & Beck clutch

Post by ASL642 »


Lou Rocke
MMOC 43512
maxwoods
Minor Friendly
Posts: 23
Joined: Wed Jun 30, 2004 12:52 pm
Location: surrey
MMOC Member: No

Re: Borg & Beck clutch

Post by maxwoods »

try MEVspares - on tinternet - located in the boonies outside Tunbridge Wells. Just got a complete 7.25 inch moggie clutch assembly, including thrust bearing for £67. He is open on Sundays too!
Post Reply