Bonnet Rust - advice needed please

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
UOGMoggie
Minor Friendly
Posts: 59
Joined: Thu Dec 29, 2005 2:26 pm
Location: Anstey, Leicestershire
MMOC Member: No

Bonnet Rust - advice needed please

Post by UOGMoggie »

My traveller has a patch of rust on the bonnet, please see photo...

I'm not able to tackle this myself but want it sorted, any ideas as to how much this would cost to be repaired and I assume it would be best for the entire bonnet to have a respray?

Also, any recommendations for the Leicestershire area to do the job?

Thanks, Matt![frame]Image[/frame]
72416
1970 Traveller
chickenjohn
Minor Legend
Posts: 4064
Joined: Tue Dec 07, 2004 8:50 am
Location: Margate, East Kent
MMOC Member: No

Re: Bonnet Rust - advice needed please

Post by chickenjohn »

Yes, on such a prominent part of the car the whole bonnet should ideally be re-sprayed or the repairs will show. The rust should be wire brushed/ sanded and preferably spot blasted to bare clean metal on that patch to avoid recurrence. As for who to do the job, first port of call is ask your local branch!
Cheers John - all comments IMHO
- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )
ImageImage
ASL642
Minor Maniac
Posts: 5200
Joined: Sat Oct 20, 2007 3:14 pm
Location: Worcestershire
MMOC Member: Yes

Re: Bonnet Rust - advice needed please

Post by ASL642 »

Try PM'ing poster HarryMango on this site - a member of the Leicester Branch or email http://www.leicsmmoc.org.uk
or contact John Hales 01five09 eight135zero7

Lou Rocke
MMOC 43512
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bonnet Rust - advice needed please

Post by bmcecosse »

That's been going on for quite some time! The metal may be very thin now..... Frankly I would pick up a better bonnet - spray it and swop over.........
ImageImage
Image
UOGMoggie
Minor Friendly
Posts: 59
Joined: Thu Dec 29, 2005 2:26 pm
Location: Anstey, Leicestershire
MMOC Member: No

Re: Bonnet Rust - advice needed please

Post by UOGMoggie »

Thanks for the replies. I've only had the car for a couple of months and it needs a very small amount of tidying, this rust on the bonnet being the worst area, also needs some work to the near side waist rail.

I think I will keep an eye out for a replacement bonnet and the rear wings can be tidied at the same time.

Lou I have emailed John Hales as I'm interested in attending a monthly Leicestershire meet... I think we met years ago when I lived in Coventry and came to one of your meetings?

I'll update the thread with how I get on..
72416
1970 Traveller
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bonnet Rust - advice needed please

Post by bmcecosse »

I think if you rub that hard enough to get back to 'clean' metal it will go into holes.... Could make it a cold air inlet for the carb ... https://www.google.co.uk/search?q=naca+ ... 66&bih=625
ImageImage
Image
Post Reply