Hi Folks,
The new Morris is going well.
However a wee problem has occurred that is annoying me. Probably been there all the time but I have just noticed it.
I have hazard warning lights fitted.
When you turn left the green light on the indicator stock flashes okay and all is well.
When you turn right the green light on the indicator stock flashes but the hazard warning switch flashes too.
All the flashers and hazard warning lights operate as they should.
Only the hazard warning light illuminated switch flashing in time with the green stock light when turning right is the problem.
Obviously the hazard warning light switch is off during the above scenario.
I know it is no great problem just an interesting one, for me anyway!
All the best,
Ian
Indicator/hazard problem
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 96
- Joined: Wed Jan 16, 2013 8:00 am
- Location: Argyll Scotland
- MMOC Member: No
-
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: Indicator/hazard problem
what type of hazard is it
i have a wiring diagram of th orginal lucas type
i have a wiring diagram of th orginal lucas type
-
- Minor Friendly
- Posts: 96
- Joined: Wed Jan 16, 2013 8:00 am
- Location: Argyll Scotland
- MMOC Member: No
Re: Indicator/hazard problem
Now there is a question.
It is the one you can get on ebay.
It has a pull out switch that is illuminated.
The hazard warning relay is fitted on a bracket behind the illuminated switch.
Ian
It is the one you can get on ebay.
It has a pull out switch that is illuminated.
The hazard warning relay is fitted on a bracket behind the illuminated switch.
Ian
-
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: Indicator/hazard problem
does it al connect into the original indicater wiring and still use the original type flasher relay
-
- Minor Friendly
- Posts: 96
- Joined: Wed Jan 16, 2013 8:00 am
- Location: Argyll Scotland
- MMOC Member: No
Re: Indicator/hazard problem
I will need to check that.
Will do tomorrow, I do have the original indicator relay under the bonnet.
The flasher relay is under the dash.
Ian
Will do tomorrow, I do have the original indicator relay under the bonnet.
The flasher relay is under the dash.
Ian
-
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: Indicator/hazard problem
the lucas ones have an inbuilt relay, you then just connect the wires into the excisting indicater loom
-
- Minor Friendly
- Posts: 96
- Joined: Wed Jan 16, 2013 8:00 am
- Location: Argyll Scotland
- MMOC Member: No
Re: Indicator/hazard problem
Just checked out the wiring and quite honestly was struggling to trace the wires.
However you are correct the wiring from the new hazard warning lights do disappear into the existing wiring loom.
I was round at my local garage and explaining the fault to the mechanic.
He tried the indicators and it did do the same with the hazard warning light on the switch.
He then turned the hazard warning lights on and off and the fault disappeared.
He reckons the hazard warning switch was not fully pushed in!!
Whether that is right or wrong we will never know. But it has stopped doing it now.
Will keep my eye on it and thanks for your help and advice it did help.
All the best,
Ian
However you are correct the wiring from the new hazard warning lights do disappear into the existing wiring loom.
I was round at my local garage and explaining the fault to the mechanic.
He tried the indicators and it did do the same with the hazard warning light on the switch.
He then turned the hazard warning lights on and off and the fault disappeared.
He reckons the hazard warning switch was not fully pushed in!!
Whether that is right or wrong we will never know. But it has stopped doing it now.
Will keep my eye on it and thanks for your help and advice it did help.
All the best,
Ian