Control box

for those with Series MM sidevalve cars produced between September 1948 and February 1953
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
1843lamp
Minor Friendly
Posts: 36
Joined: Fri Nov 16, 2012 1:32 am
MMOC Member: No

Control box

Post by 1843lamp »

I am having some trouble discovering the correct control box that was used on the 52 ,anyone have a photo ?regards,rob.
Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Control box

Post by mike.perry »

Control Box RB106 with screw terminals, not the later spade terminals. You should also have a C39 dynamo.
[sig]3580[/sig]
Top
1843lamp
Minor Friendly
Posts: 36
Joined: Fri Nov 16, 2012 1:32 am
MMOC Member: No

Re: Control box

Post by 1843lamp »

Thank you Mike ,I was not sure because I have seen a number of cars with a larger regulator with more screw terminals and exterior spare fuses mounted outside on the cover,Do you know if there was a change point ? Or were all MM s fitted with the rb 106?
Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Control box

Post by mike.perry »

The early Series MMs had the combined control and fuse box. Change over was SMM 116186 (RHD)
[sig]3580[/sig]
Top
1843lamp
Minor Friendly
Posts: 36
Joined: Fri Nov 16, 2012 1:32 am
MMOC Member: No

Re: Control box

Post by 1843lamp »

Great,thank you very much Mike regards,rob.
Top
Post Reply

Return to “Series MM Register”