MM engine rubber mounts
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 31
- Joined: Mon May 12, 2008 10:20 am
- Location: essex
- MMOC Member: Yes
MM engine rubber mounts
Anybody know of a supplier for the mount ? I have heard use morris 1000 gearbox mounts but the fixing though the alloy mount does`t look long enough or does it work ok, please advise
-
- Minor Legend
- Posts: 3010
- Joined: Sun Sep 09, 2007 10:42 pm
- Location: Whiteabbey, Co Antrim
- MMOC Member: Yes
Re: MM engine rubber mounts
I bought the ones that are sold by ESM when I put the MM engine back in, the threads are only just long enough. I would have prefered them to be a bit longer but they have done the job.
Too many Minors so little time.....
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: MM engine rubber mounts
I am also using M1000 gearbox mounts. I seem to have aquired a pair of nuts with a tubular section which fits through the engine mounting hole and provides a longer thread.
I had heard that ESM were providing mounting rubbers with longer threads, I will have to check.
I had heard that ESM were providing mounting rubbers with longer threads, I will have to check.
[sig]3580[/sig]