Exhaust question ?

[Robbiedavis82]

Evening all I'm a little confused here, I've got my new stainless two piece exhaust here i also got new clamps is there different types of clamps for the later minor? That bolt to the body work, I will try post pic up with what i have now hope someone can help thanks rob.

[Robbiedavis82]

Old type now[frame][/frame]

[Robbiedavis82]

New ones

[Robbiedavis82]

.

[bmcecosse]

The rubber loop you show is a very non-standard exhaust mount....

[Robbiedavis82]

Thats what i was worried about is it in the same area where should go?

[Robbiedavis82]

Wont let me upload new ones

[Robbiedavis82]

Does anybody have any pics that u cam see where clamps should be?

[bmcecosse]

Clamps are just to connect the parts together - you should have a couple of hangers = one roughly where you show the picture and the other at the rear behind the axle.

[Robbiedavis82]

Ok the rear one is where its spose to be, where is the middle hanger suppose to bolt to?

[bmcecosse]

Pretty much where that loop is - but is normally a length of hanger strap fixed to the floor and then to the U clamp. It's nothing special.

[Robbiedavis82]

Is it the bigger one out of these two? Hopefully should just bold to same hole

[Robbiedavis82]

[frame][/frame]

[Trickydicky]

Those are the correct fixings for the exhaust. Don't tighten the U clamps too tight!!