Cracked Head or Piston Rings

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Cracked Head or Piston Rings

Post by bmcecosse »

The rev 'counter' will be electronic......but don't worry - the timing is best set on the road, not by worrying about static settings. And don't worry about 'flushing' the new oil will be fine. What IS important though - were the spring and plate present under the new oil filter cartridge, to hold it tight against the top plate??
ImageImage
Image
magnuscat
Minor Friendly
Posts: 11
Joined: Wed Nov 28, 2012 9:12 pm
MMOC Member: No

Re: Cracked Head or Piston Rings

Post by magnuscat »

Filter assembly was set up as book shows with the exception of it having an O ring instead of the felt washer and no circlip, it fitted up flush and had to be screwed to the sealing ring in the housing with the threads using the spring pressure. Then lightly nipped up, no leaks.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Cracked Head or Piston Rings

Post by bmcecosse »

That sounds fine - many are lost, and then there is NO filtration - and engine failure follows soon after........
ImageImage
Image
Post Reply