Give us a wipe

[lowride stepside]

At the start of the year I put my truck back on the rd ,and one of the new things i fitted was a pair of wipers from ESM by june , both rubber squeegy edges had torn off , so I phoned and moaned , they said no probs we'll send you some more ,which they did , I posted the old ones back as agreed , today jumped in the old girl and the drivers wiper blade is peeling off again ,anyone else experianced this , or more importantly where can i get some good ones.

[Roni]

I put some stainless steel wipers on mine a few years ago and the same thing happened. I fitted some wiper rubber refills, obtained locally, and problem gone. It is a pity when brand new components have to be replaced.

[lowride stepside]

And the stainlees is not all that either , reckon there made in china

[Dean]

Sometimes local motor factors buy in higher quality parts. Unless the bit is unobtainable from my local factors, I then go to ESM and the like. It's always worth walking in and asking the question, basically because if it does go wrong, it's only 1/2 an hour and a new replacement can be fitted.

[andy.pointeer]

I purchased wiper blade refils from Halfords, these needed to be cut down (make sure you cut the correct end) but fitted into the existing chrome wiper arms and work OK

[Matt Tomkins]

22inch wiper blade from wilko for £3, remove the rubber strip, cut in half, slide onto stainless!

[lowride stepside]

Or just keep sending them back until ESM get better quality ones . But I Might try the wilko's
P.S tride befrendin Yo young Mo foes on dat FB an ting an me aint erd nutting wot appening bro

[lambrettalad]

has the sites spell checker brokkkkken ?

[lowride stepside]

has the sites spell checker brokkkkken ?

No I was talking dis n dat to the young members , innit . Well the ones without a silver spoon .