Sticking Accelerator Pedal

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
mabelsowner
Newbie
Posts: 4
Joined: Sun Oct 07, 2012 7:11 pm
Location: wiltshire
MMOC Member: No

Sticking Accelerator Pedal

Post by mabelsowner »

Anyone got any advice as to how to rectify a sticking pedal. When I push pedal down , it will go so far and return easily. However if it is pushed further the pedal doesn't return. It got stuck full on this morning and I had to flick it up with my foot!
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Sticking Accelerator Pedal

Post by mike.perry »

Undo the cable at the carb and pull it back from the pedal to check that it is not frayed.
Check that the pedal is moving freely up and down and not obstructed by carpets or mats
Check the return spring on the carb
[sig]3580[/sig]
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Sticking Accelerator Pedal

Post by bmcecosse »

Fit a nice new cable (and buy a spare at the same time for the glovebox). Get a nice long cable with a sweeping bend. It is perfectly possible to use a bicycle gear change or brake cable if your outer sheath is ok - ie NOT kinked.
ImageImage
Image
JOWETTJAVELIN
Minor Legend
Posts: 2775
Joined: Mon Dec 12, 2011 7:20 pm
Location: LANCASHIRE (paradise)
MMOC Member: Yes

Re: Sticking Accelerator Pedal

Post by JOWETTJAVELIN »

A dab of solder along the end will prevent future problems of fraying.
Post Reply