Hi I hope a quick question - what thread size screws (or bolts) do I need to mount the control box on the bulkhead?
Thanks
Control box screws
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Control box screws
Any bolt small enough diameter to go through the hole in the control box and the bulkhead. Easier with one person pushing the bolt through whilst the other locates the washer and nut
[sig]3580[/sig]
-
- Minor Fan
- Posts: 293
- Joined: Mon Aug 09, 2010 11:20 pm
- Location: In the Middle
- MMOC Member: Yes
Re: Control box screws
Hi, the original ones were 2BA crosshead, and with the window open one person can reach both sides.
Available from http://www.namrick.co.uk/

Should be ready for tea time.
-
- Minor Addict
- Posts: 544
- Joined: Sat Oct 23, 2010 9:03 pm
- Location: Caerleon, Newport, South Wales
- MMOC Member: No
Re: Control box screws
The two screws holding my control box to the bulk head are self tappers, no nuts.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
-
- Minor Legend
- Posts: 1395
- Joined: Sat Jan 06, 2007 3:55 pm
- Location: Raunds, Northamptonshire
- MMOC Member: No
Re: Control box screws
Thanks for the replies guys. Actually in digging out all the old parts from the stripdown I found the originals - 2 long crosshead self tappers that fit perfectly.
]