Bulbs

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Bulbs

Post by andygill »

Does anyone know what bulb I need for the dashboard light on my 1970 traveller and the brake light bulb.

I want to try and get them from a shop rather than online.

Thanks
autolycus
Minor Addict
Posts: 510
Joined: Fri Dec 22, 2006 6:53 pm
Location: Derby
MMOC Member: No

Re: Bulbs

Post by autolycus »

Where have you already looked for the spec?

Have you tried going into a shop with your old one?

Kevin
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

Brake is 5/21 watt double filament bulb with offset pins.....very common.
ImageImage
Image
washer-bottle
Minor Friendly
Posts: 95
Joined: Thu Jun 24, 2004 12:38 am
Location: Cirencester
MMOC Member: Yes

Re: Bulbs

Post by washer-bottle »

Andy

Instrument panel (speedo) bulbs are 12V 2.2W MES/E10 type 987. (MES means Minature Edison Screw). They look like old torch bulbs.

Halfords sell them at great expense if you really must ...
http://www.halfords.com/webapp/wcs/stor ... yId_165538

Al
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

It's MOST unusual for an instrument panel bulb to fail - but I guess it can happen.....
ImageImage
Image
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

bmcecosse wrote:It's MOST unusual for an instrument panel bulb to fail - but I guess it can happen.....
Is there anything else I can check before I go for the bulb ?
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Bulbs

Post by mike.perry »

Swap the inst panel bulbs over
[sig]3580[/sig]
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

mike.perry wrote:Swap the inst panel bulbs over
Finally managed to check the wires.

They all look OK, so it should be the bulbs.

How many bulbs are there for the speedo ?
Fingolfin
Minor Legend
Posts: 1312
Joined: Thu Jan 28, 2010 4:14 am
Location: Fulton, Missouri, United States
MMOC Member: No

Re: Bulbs

Post by Fingolfin »

Two for illumination, four (since yours is '70) for idiot lights. Each bulb is in a clearly-visible socket mounted in the back of the speedo. So six in total -- though it's nice to have a couple spares of everything, so if you find a pack of ten, get it.
The way to a man's heart may be making food, but the way to my heart is buying me car parts!
Come read about my Minor at An American Moggie.

andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

Fingolfin wrote:Two for illumination, four (since yours is '70) for idiot lights. Each bulb is in a clearly-visible socket mounted in the back of the speedo. So six in total -- though it's nice to have a couple spares of everything, so if you find a pack of ten, get it.
I only need the illumination bulbs.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

Amazing if they have both failed...
ImageImage
Image
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Bulbs

Post by mike.perry »

Have you actually checked the bulbs?
[sig]3580[/sig]
linearaudio

Re: Bulbs

Post by linearaudio »

And have you checked the little on/off slide switch under the dash is "on" or not disintegrated?
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

Your both right it's not the bulbs.

The only bulbs that are lit are the red and blue on the right hand side.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

It's 'never' the bulbs............ :o :lol:
ImageImage
Image
autolycus
Minor Addict
Posts: 510
Joined: Fri Dec 22, 2006 6:53 pm
Location: Derby
MMOC Member: No

Re: Bulbs

Post by autolycus »

I'm afraid that this one is more a case for St Jude than for the more frequent contributors to this messageboard. When the poster is so determined not to do anything he is advised to do, or to do any thinking or investigating for himself, I don't think he'll be satisfied until someone goes round to his house, wipes anything that needs wiping, and mends his car for him.

Messageboards work fine usually, but in this case, as with the OP's headlamp query, they do need a certain degree of cooperation from the OP.

Kevin
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

The red and blue are lit - WHEN???? Are the bulbs clipped in the wrong holes in the speedo???????????? :roll: :roll: :roll:
ImageImage
Image
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

bmcecosse wrote:The red and blue are lit - WHEN???? Are the bulbs clipped in the wrong holes in the speedo???????????? :roll: :roll: :roll:
Sorry its the orange and red ones. They are lit when I turn the ignition key and go off when the engine starts.
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Bulbs

Post by bmcecosse »

Ah right - that's spot on correct then....... Have you checked the join where the red wire and the two red/white wires appear to be joined together - are they? Or are they just bundled up together but not joined??
ImageImage
Image
andygill
Minor Fan
Posts: 174
Joined: Mon Nov 14, 2005 5:14 pm
Location: Warrington, Cheshire
MMOC Member: No

Re: Bulbs

Post by andygill »

bmcecosse wrote:Ah right - that's spot on correct then....... Have you checked the join where the red wire and the two red/white wires appear to be joined together - are they? Or are they just bundled up together but not joined??
I did check but I'm going to buy a new connector as the old one is pretty worn.
Post Reply