Engine Cut Out
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Engine Cut Out
And don't go anywhere near the 'experts' that told you it was a 'sticking fuel regulating valve'
in the carb..........




-
MarkyB
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: Engine Cut Out
To be fair they weren't far off the mark, not everyone knows about Minor foibles.
I's suggest Jonnyd gets a nice new pump, it's a much easier job to swap pumps than replace points.
I's suggest Jonnyd gets a nice new pump, it's a much easier job to swap pumps than replace points.
"Once you break something you will see how it was put together"
-
MarkyB
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: Engine Cut Out
Wasn't there a bad batch recently?
Get in touch with the supplier.
Get in touch with the supplier.
"Once you break something you will see how it was put together"
Re: Engine Cut Out
Well bad batch or not, it would appear I was wrong about the age of the pump.
All fitted this evening and everything seems fine, might be me but there does seem to be an occasional guff of petrol fumes. Not sure though and nothing seems to be leaking/wet. Also the new pump (genuine su) makes a bit of a knocking noise which I assume is normal.
All fitted this evening and everything seems fine, might be me but there does seem to be an occasional guff of petrol fumes. Not sure though and nothing seems to be leaking/wet. Also the new pump (genuine su) makes a bit of a knocking noise which I assume is normal.
-
MarkyB
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: Engine Cut Out
Sounds fine, should be good for another 30 years or so.
"Once you break something you will see how it was put together"
Re: Engine Cut Out
thanks for your help guys ;) now to get that speedo working.........