I have a 1937 Morris 8 Tourer fitted with a USHM3 engine from a split screen Minor. The oil filter insert should have (I think) a steel disc underneath it but it is missing. Could anyone out there give me dimensions so that I could make one please?
Thank you,
Howard
USHM3 oil filter
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: USHM3 oil filter
[frame]
[/frame]
The Purolator oil filter should have a disc in the filter bowl the same shape and size as the disc in the filter housing. It is secured by a spring underneath and a split pin on top. When the filter bowl is tightened it compresses the element against the top disc.
The Purolator oil filter should have a disc in the filter bowl the same shape and size as the disc in the filter housing. It is secured by a spring underneath and a split pin on top. When the filter bowl is tightened it compresses the element against the top disc.
[sig]3580[/sig]
Re: USHM3 oil filter
Thanks Mike, I'll machine one up.
Regards,
Howard
Regards,
Howard