Water pump pulley / bottom rad tube

for those with Series MM sidevalve cars produced between September 1948 and February 1953
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
philipdarragh
Newbie
Posts: 4
Joined: Sat Apr 28, 2012 7:14 pm
MMOC Member: No

Water pump pulley / bottom rad tube

Post by philipdarragh »

Hi , does anyone know where i can get a water pump pulley and a copper bottom radiator tube to complete my heater fitting to my 1951 MM sidevalve ? Thanks
Top
WPR678B
Minor Legend
Posts: 1103
Joined: Tue Jan 03, 2006 9:34 pm
Location: Dorset, UK
MMOC Member: Yes

Re: Water pump pulley / bottom rad tube

Post by WPR678B »

JLH do the pulley for the pump :
http://www.jlhmorrisminors.co.uk/store/ ... ductId=398
You will probably have to make up the pipe though. It was discussed here :
http://www.mmoc.org.uk/viewtopic.php?f=19&t=41051
Hope this helps?

Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Water pump pulley / bottom rad tube

Post by mike.perry »

You might be able to get a rubber hose to fit
[sig]3580[/sig]
Top
philipdarragh
Newbie
Posts: 4
Joined: Sat Apr 28, 2012 7:14 pm
MMOC Member: No

Re: Water pump pulley / bottom rad tube

Post by philipdarragh »

Thanks very much for the information to both of you , i have ordered a pulley today .
Top
Post Reply

Return to “Series MM Register”