okay, so the latest problem...
when we got the mog it already had both spring hangers removed. what's the best and most accurate way of aligning the two new ones?
cheers!
Front spring hanger alignment
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 78
- Joined: Wed May 25, 2011 7:56 pm
- MMOC Member: No
Front spring hanger alignment
1961 Morris Minor - Smithy
-
- Minor Friendly
- Posts: 61
- Joined: Wed Aug 15, 2007 7:21 pm
- Location: Manchester
- MMOC Member: No
Re: Front spring hanger alignment
im guessing that this is for the front spring hangers for the rear axle, given the front of the car is on torshion bars?
Steam enthusiast, owner of 2 Morris minors and hes only 24
Prowed Owner of
Moggy 1964 Rose Taupe Morris Traveller ATY 243 B
Trevor 1964 Trafalgar Blue Morris Traveller PRX 220 B (under restoration)
KGC Engineering, Heritage Transport Restoration and Maintenance 07879 368 181 kgcengineering@hotmail.co.uk
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: Front spring hanger alignment
.
Last edited by RobThomas on Fri Jul 06, 2012 9:25 pm, edited 1 time in total.
Cardiff, UK
Re: Front spring hanger alignment
According to Haynes, the distance between the OUTER ends of the spring anchorage bolts should be 42 and 23/64ths of an inch
which is apparently 107.59 cm (whatever those are). No measurements for the front to back location tho'
which is apparently 107.59 cm (whatever those are). No measurements for the front to back location tho'
Jon Rocke
Re: Front spring hanger alignment
Pages R 16 and 17 of the Workshop Manual may help. http://theminorsite.co.uk/wp-content/ga ... 00x879.png http://theminorsite.co.uk/wp-content/ga ... 00x876.png