DOOR LOCKS

[samuria]

i have broken the key to my door lock it has no number plus it was very worn!!! is it possible to get just the locking mechanism with new keys? need one for my van rear door as well. also how do you remove the barrel part your help much needed thanks

[JOWETTJAVELIN]

A chap on the for sale part of the forum had some keys for sale, but if the lock is worn any old key might fit it. Number is stamped on the ign. barrel, but you can't just go down to your Morris or Austin-Rover dealer and order a new one!

[andy.pointeer]

Hi Les,

I purchase a set of barrels and keys from ESM, but I have not yet fitted them. They do various combinations of barrels, they may also be availble from other suppliers.

I believe you have to strip most of the door to allow you to remove the handle, you can then change the barrel

[samuria]

(but if the lock is worn any old key might fit it)
thats the problem and why i want to change the drivers door lock. i dont have the original ignition barrel so the number is u/s for that purpose

[andy.pointeer]

ESM do barrels with key for a single door etc or in full sets they also do keys on there own (see link), but no good if you dont have the number, you may need to buy new barrel with key for the door

http://morrisminorspares.co.uk/shop/ind ... d8094f68be

[samuria]

ESM do barrels with key for a single door etc or in full sets they also do keys on there own (see link), but no good if you dont have the number, you may need to buy new barrel with key for the door

http://morrisminorspares.co.uk/shop/ind ... d8094f68be

cheers andy will give them a call on monday