Wiring a voltage regulator for fuel gauge into a 1956 morris

[Peterkidd]

Hi everyone, my 1956 fuel gauge has died, I've been told the only replacement requires a voltage regulator which I have located on ebay

[/url]http://www.ebay.co.uk/itm/270965492213? ... 1438.l2649

The issues are as follows, my mark 2 1956 split screen has a group of two wires going to the fuel gauge and a signal wire. They are all cream, I don't know anything about electrics, how do i wire these into the regulator to make the later type gauge work. The car has been made negative earth
Photos are best as wire diagrams mean little
Thanks Peter

[bmcecosse]

The later fuel gauge is a completely different arrangement. Just fix what you have - what's wrong with it?

[mike.perry]

It is probably easier to pick up a used speedo with a fuel gauge attached. If you intend using the speedo then check that it has the same TPM, the 4 fig no. on the dial after the serial no.
Meanwhile carry a dipstick and spare can of fuel