Disc brakes
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Bonkie
- Minor Friendly
- Posts: 37
- Joined: Mon Nov 21, 2011 11:32 pm
- Location: London chingford
- MMOC Member: No
Disc brakes
Does anyone know if the disc and hub assembly from a mg midget would go straight on a Morris ?
-
Alex'n'Ane
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Re: Disc brakes
Disc and hub yes. Calliper mounting bracket, no. Have a search on here, there is a special J shape bracket for it.
___Anne___
-
IslipMinor
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Disc brakes
Here is the 'J' bracket required to mount the Midget caliper - 2 required, same for LH and RH.[frame]
[/frame]
Richard
-
Bonkie
- Minor Friendly
- Posts: 37
- Joined: Mon Nov 21, 2011 11:32 pm
- Location: London chingford
- MMOC Member: No
Re: Disc brakes
Thanks for all your help guys
Re: Disc brakes
Usual caveat - these brakes will be no better than 8" drums, and you will need to remove the 'top hat' seal from the master cylinder to use them , and maybe you will need a servo, and a remote reservoir for the master cylinder..... You can fit better calipers of course - but is it necessary/worth it?
