Hello again,sorry to be a pest but this is a good site for getting answers.
I have just bought a second hand steel sun visor which seems too wide by about an inch,it is the correct shape and is quite old,it was sold for a morris minor.
Can anyone tell me if the morris oxford is slightly wider as I have my suspicions as to weather it should be for this instead.
Regards Si
metal sun visor problem
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: metal sun visor problem
Hi Si, i`ve just bought one for mine, give me a while and i`ll measure it and post them on here for you.Rob.
Re: metal sun visor problem
Thanks Rob
Re: metal sun visor problem
Si, have just bought one on ebay from a guy in Bideford today, i`ve measured it length ways, in old money it`s a tad under 47 1/2 inches, ( forty seven and a half inches) or in euros 1205mm.hope this helps.
Re: metal sun visor problem
Cheers, just measured mine and its 48 and 1/4 long. what a bummer.