
replacing 803 engine & Gearbox with 948 or 1098
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: replacing 803 engine & Gearbox with 948 or 1098
See attached from original Minor matters tech Tips manual. A point we all missed
[frame]
[/frame]

Re: replacing 803 engine & Gearbox with 948 or 1098
Sorry - that looks a bit small[frame]
[/frame]
Hope this is better
Hope this is better

-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: replacing 803 engine & Gearbox with 948 or 1098
Not in my copy of Tech Tips, I have Second Edition
[sig]3580[/sig]
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: replacing 803 engine & Gearbox with 948 or 1098
Very interesting. Where can I get a copy of 'Tech Tips'?
That's strange R2, the damage doesn't look so bad from here!
Re: replacing 803 engine & Gearbox with 948 or 1098
Latest version on CD - follow this link. Not sure if some of the old stuff will be on there, especially if Mikes later copy doesn't have the version of the job that mine does
http://www.mmoc.org.uk/index.php?key=In ... =Technical Tips
http://www.mmoc.org.uk/index.php?key=In ... =Technical Tips
Re: replacing 803 engine & Gearbox with 948 or 1098
It does make sense to swap that selector rod - but never heard it mentioned before.



-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: replacing 803 engine & Gearbox with 948 or 1098
Tried the link, but just got stuff about Ethanol in Petrol.
That's strange R2, the damage doesn't look so bad from here!
Re: replacing 803 engine & Gearbox with 948 or 1098
http://www.mmoc.org.uk/index.php?key=In ... =Technical Tips
Don't think the link copied fully - sorry 'bout that. If it doesn't work this time, just look at the side bar and click on the tech tips link. You'll see the mention of the CD version but you have to be a member to get it I think.
Don't think the link copied fully - sorry 'bout that. If it doesn't work this time, just look at the side bar and click on the tech tips link. You'll see the mention of the CD version but you have to be a member to get it I think.
Re: replacing 803 engine & Gearbox with 948 or 1098
For some reasomn it's not adding the 'tips' bit into the web address but you should be able to find it from the home page