Speedo problem.

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Speedo problem.

Post by Robbiet9999 »

Hi i have a 1957 four door morris minor 1000 with 948cc. The speedo doesnt return to zero unless left for a long time or glass is tapped. Also the speed reading whilst driving is very optomistic i have used my mobile via gps as a speedo and the car will read 60mph when gps says im doing 45mph and the trip meter does not move but im not too worried about that. any help will be gratefully received. :D
Henrietta
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Speedo problem.

Post by bmcecosse »

The mileometer must be jammed - probably beyond economic repair, and the speed needle mech will be contaminated with oil. Frankly - the best option is to get another speedo. Not the tpm number on the dial so you get another with the same number to keep the speed/miles readings reasonable.
ImageImage
Image
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

Hi was thinking of maybe taking it apart and cleaning it with a decrease to see if it helps
Henrietta
C6Dave
Minor Fan
Posts: 310
Joined: Fri Jul 22, 2011 8:16 am
Location: East Northumberland
MMOC Member: No

Re: Speedo problem.

Post by C6Dave »

To get it overhauled would cost circa £90 from Speedy Cables. Not cheap but it will work fine but takes from 4-6 weeks to get done.

If it's contaminated with oil, then you need a new speedo cable as well probably or it will happen again. (there is a thread on cleaning a speedo head on site)

Intereurope Repair Manual says that on MM's the later models had a modified drive assembly using a modified drive bearing (31449) and a modified pinion (31439) because of speedo head oil contamination on early models

A Gaco oil seal (162285) was also used

You can see if it's modified as it has a second 'hexagon' which contained the oil seal
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Speedo problem.

Post by bmcecosse »

Once the mileage readout sticks - gears become damaged/worn = expensive repair. You can usually pick up working speedos for £5/10.
ImageImage
Image
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

Would one from a later 1000 work in my one
Henrietta
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Speedo problem.

Post by mike.perry »

The speedo drive modifications were to the early Series MM gearboxes, nothing to do with M1000.
If the mileometer is not working it could be due to a broken drive gear. The workings of the speedometer are very fragile and I would not recommend attempting to clean it unless you have a very steady hand.
You need a replacement speedo with a TPM of 1504.
[sig]3580[/sig]
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

How would i know it has a tpm of 1504. Have seen a few on ebay which are mostly black. mine is more a Magnolia beige in colouring ign oil ind and beam lights.
Last edited by Robbiet9999 on Sat Jan 28, 2012 8:38 pm, edited 1 time in total.
Henrietta
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Speedo problem.

Post by mike.perry »

The TPM is printed on the face of the speedometer after the Serial Number
Black speedos are generally for 1098 Minors with a TPM of 1408, except 1098 LGVs which have a tpm of 1504.
[sig]3580[/sig]
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

But my minor is a 948cc 4 door saloon not an lgv has it got the wrong clock then
Henrietta
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Speedo problem.

Post by bmcecosse »

As suggested earlier - what is the tpm of your speedo??? Then we can look for a replacement......
ImageImage
Image
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

The tpm of my speedo is 1500
Henrietta
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Speedo problem.

Post by bmcecosse »

1500 exactly - or 1504 ? And is it 'bronze' faced ?? Also - what's the top speed shown?
This for example is NOT a Minor speedo, it is a Mini speedo with tpm 1376.... it's also far too expensive...
http://www.ebay.co.uk/itm/Morris-minor- ... 3843880394

Here's one - but you will need to ask them for the tpm number before bidding. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0938379705
ImageImage
Image
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

1500 exactly its a creamy gold colour top speed is 80mph
Henrietta
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Speedo problem.

Post by mike.perry »

1500 is near enough to 1504, what is the S/N?
[sig]3580[/sig]
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

Sn 4401/15
Henrietta
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Speedo problem.

Post by mike.perry »

That is correct. See speedo table http://seriesmm.mmoc.org.uk car ident speedo ident
[sig]3580[/sig]
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

Will check chassis number when it gets light as its only 6.20
Henrietta
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Speedo problem.

Post by bmcecosse »

Chassis number has basically nothing to do with it......you just need a bronze face speedo with 80 mph top speed and 1500 or 1504 tpm...... assuming you still have a 4.55 final drive in the axle. And don't pay more than £10 for it!!!
ImageImage
Image
Robbiet9999
Minor Fan
Posts: 211
Joined: Thu Jan 12, 2012 6:19 pm
Location: Linford. Essex
MMOC Member: No

Re: Speedo problem.

Post by Robbiet9999 »

As far as i know it still has the original final drive. any ideas where i would get one from
Henrietta
Post Reply